Session Dates
19 Oct 2000
Abstract
This paper describes and discusses the results obtained from a series of tensile tests performed on cold formed stainless steel Type 304 members of lipped channel cross-section. Standard tensile tests on coupons cut from the webs of the sections were carried out, as were full section tensile tests. Ramberg-Osgood type curves based on the procedure suggested in the ASCE design code were fitted to the stress-strain results and these are compared with the experimental results and Ramberg-Osgood type curves derived on an alternative basis.
Department(s)
Civil, Architectural and Environmental Engineering
Research Center/Lab(s)
Wei-Wen Yu Center for Cold-Formed Steel Structures
Meeting Name
15th International Specialty Conference on Cold-Formed Steel Structures
Publisher
University of Missouri--Rolla
Document Version
Final Version
Rights
© 2000 University of Missouri--Rolla, All rights reserved.
Document Type
Article - Conference proceedings
File Type
text
Language
English
Recommended Citation
MacDonald, M.; Rhodes, J.; and Taylor, G. T., "Mechanical Properties of Stainless Steel Lipped Channels" (2000). CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018). 4.
https://scholarsmine.mst.edu/isccss/15iccfss/15iccfss-session11/4
Mechanical Properties of Stainless Steel Lipped Channels
This paper describes and discusses the results obtained from a series of tensile tests performed on cold formed stainless steel Type 304 members of lipped channel cross-section. Standard tensile tests on coupons cut from the webs of the sections were carried out, as were full section tensile tests. Ramberg-Osgood type curves based on the procedure suggested in the ASCE design code were fitted to the stress-strain results and these are compared with the experimental results and Ramberg-Osgood type curves derived on an alternative basis.
