October 15-16, 1998 (St. Louis, Missouri)
Presented by: Department of Civil Engineering Center for Cold-formed Steel Structures University of Missouri - Rolla
Sponsored by: American Iron and Steel Institute Metal Building Manufacturers Association Metal Construction Association Metal Lath/Steel Framing Association, Division of NAAMM Rack Manufacturers Institute Steel Deck Institute University of Missouri - Rolla
In Cooperation with: ASCE Committee on Cold-Formed Steel Members Canadian Sheet Steel Building Institute, Canada SSRC Task Group on Thin-Walled Metal Construction University of Strathclyde, Scotland, UK Centre for Advanced Structural Engineering of the University of Sydney, Australia e
Edited by: Wei-Wen Yu and Roger A. LaBoube
Conference Directors: Wei-Wen Yu, director Robert A. LaBoube, associate director, Center for Cold-formed Steel Structures, University of Missouri-Rolla
Planning Committee: R.L. Brockenbrough - R.L. Brockenbrough & Associates, Inc. H.H. Chen - Representative of the American Iron and Steel Institute W.S. Easterling - Representative of the SSRC Task Group on Thin-Walled metal Construction D.S. Ellifritt - University of Florida S.J. Errera - Consultant E.R. Estes - Representative of MLSFA/NAAMM S.R. Fox - Representative of CSSBI, Canada G.J. Hancock - Representative of the University of Sydney, Australia R.B. Haws - American Buildings Company R.B. Heagler - Nicholas J. Bouras, Inc.; Representative of SDI A.L. Johnson - Niobrara Engineering and Research Company Inc. D.L. Johnson - Consultant R.A. LaBoube - UMR; Co-Director J.A. Mattingly - Nicholas J. Bouras, Inc.; Representative of MCA W.R. Midgley - Representative of RMI T. Peköz - Cornell University T.M. Petry - Representative of the UMR Civil Engineering Department J. Rhodes - Representative of the University of Strathclyde, Scotland, UK P.A. Seaburg - Pennsylvania State University R.L. Serrette - Representative of the ASCE Committee on Cold-formed Members W.L. Shoemaker - Representative of MBMA B.J. Unal - Representative of the UMR Continuing Education W.W. Yu - UMR; Director, Representative of CCFSS
Browse the contents of (1998) - 14th International Specialty Conference on Cold-Formed Steel Structures:
- Session 01: Distortional Buckling and Buckling Mode Interactions
- Session 02: Flexural Members
- Session 03: Web Crippling of Beams
- Session 04: Compression Members
- Session 05: Rack Structures
- Session 06: Residential Construction
- Session 07: Composite Construction
- Session 08: Materials
- Session 09: Screw Connections
- Session 10: Connections
- Session 11: Stainled Steel Structures
- Session 12: Additional Paper
- Special Discussion