Abstract

In this paper, the effect of post deposition annealing (PDA) on the chemical, structural, and electrical properties of the high-kY2O3 /Al2O3 stacking dielectric on p-type 4H-SiC were studied. High-k dielectric provides a physically thicker film with equivalent capacitance, therefore better exploits the high breakdown strength of 4H-SiC in its MOSFET devices. The Y2O3 /Al2O3 stacking films were deposited using RF magnetron sputtering, with PDA in Ar ambient at 400 °C, 600 °C, 800 °C and 1000 °C. X-ray diffraction (XRD) and angle resolved X-ray photoelectron spectroscopy (XPS) results show that an Al5O12Y3 crystal layer was formed in between Y2O3 and Al2O3 films after annealing above 600 °C. High resolution transmission electron microscope (HRTEM) was used to investigate the atomic structure and measure the thickness of each layer. Charges and dielectric strength of the stacking films were characterized by high frequency capacitance-voltage (C-V) and current-voltage (I-V) measurements. The lower charge density and higher dielectric strength were found after PDA at 800 °C and 1000 °C.

Department(s)

Electrical and Computer Engineering

Publication Status

Full Text Access

Keywords and Phrases

HRTEM; Post-deposition anneal; XPS; XRD; Y 2 O 3 /Al 2 O 3 stacking dielectric

International Standard Serial Number (ISSN)

1873-4979; 0167-577X

Document Type

Article - Journal

Document Version

Citation

File Type

text

Language(s)

English

Rights

© 2025 Elsevier, All rights reserved.

Publication Date

15 Jun 2019

Download

Full Text Link

Share

 
COinS