Abstract
Near-field measurements are widely used to indicate the radiation from integrated circuits (IC). to minimize the number of field components measured in a near-field scan, it is necessary to calculate the electric field from magnetic field or vice versa. in this paper, a method based on plane wave spectrum theory is proposed to perform the H to E transformation, and a filtering technique is proposed to address the noise problem in the calculation. a simple active circuit in a 3-D full-wave simulation tool is used to validate this method. This method is useful to reduce the number of field components to be measured, resulting in faster near-field scanning. © 2011 IEEE.
Recommended Citation
Z. Yu et al., "Near-field H to E Transformation using Plane Wave Spectrum Theory," IEEE International Symposium on Electromagnetic Compatibility, pp. 542 - 546, article no. 6038371, Institute of Electrical and Electronics Engineers, Oct 2011.
The definitive version is available at https://doi.org/10.1109/ISEMC.2011.6038371
Department(s)
Electrical and Computer Engineering
International Standard Book Number (ISBN)
978-142444783-1
International Standard Serial Number (ISSN)
1077-4076
Document Type
Article - Conference proceedings
Document Version
Citation
File Type
text
Language(s)
English
Rights
© 2024 Institute of Electrical and Electronics Engineers, All rights reserved.
Publication Date
24 Oct 2011
