I-V Method based PDN Impedance Measurement Technique and Associated Probe Design
Abstract
In this paper I-V method-based impedance measurement of power distribution network (PDN) in printed circuit board (PCB) technique is proposed and compared to the traditional VNA method [1]. A I-V method-based probe is designed and verified by comparing the performance with VNA method. To de-embed the parasitic problems, a special I-V probe calibration method is created according to the characteristics of the probe.
Recommended Citation
X. Zhu et al., "I-V Method based PDN Impedance Measurement Technique and Associated Probe Design," Proceedings of the 2019 IEEE International Symposium on Electromagnetic Compatibility, Signal and Power Integrity (2019, New Orleans, LA), pp. 30 - 33, Institute of Electrical and Electronics Engineers (IEEE), Jul 2019.
The definitive version is available at https://doi.org/10.1109/ISEMC.2019.8825297
Meeting Name
2019 IEEE International Symposium on Electromagnetic Compatibility, Signal and Power Integrity, EMC+SIPI 2019 (2019: Jul. 22-26, New Orleans, LA)
Department(s)
Electrical and Computer Engineering
Research Center/Lab(s)
Electromagnetic Compatibility (EMC) Laboratory
Keywords and Phrases
Impedance; PDN; Power Distribution Network; Probe; Scope; VNA; Voltage
International Standard Book Number (ISBN)
978-153869199-1
Document Type
Article - Conference proceedings
Document Version
Citation
File Type
text
Language(s)
English
Rights
© 2019 Institute of Electrical and Electronics Engineers (IEEE), All rights reserved.
Publication Date
01 Jul 2019
