Inductance Calculations for Plane-Pair Area Fills with Vias in a Power Distribution Network using a Cavity Model and Partial Inductances
Abstract
Partial inductances are computed herein for the via transitions between parallel planes. A hybrid method proposed for the inductance calculation correlates the definition of the partial inductance and a resonant cavity model. The hybrid method is corroborated by comparison with the partial-element equivalent-circuit and the cavity methods, as well as measurements. The portions of the plane net and via net inductances are quantified, and the contribution of each plane current to the plane net inductance is quantitatively analyzed.
Recommended Citation
J. Kim et al., "Inductance Calculations for Plane-Pair Area Fills with Vias in a Power Distribution Network using a Cavity Model and Partial Inductances," IEEE Transactions on Microwave Theory and Techniques, vol. 59, no. 8, pp. 1909 - 1924, Institute of Electrical and Electronics Engineers (IEEE), Aug 2011.
The definitive version is available at https://doi.org/10.1109/TMTT.2011.2156807
Department(s)
Electrical and Computer Engineering
Research Center/Lab(s)
Electromagnetic Compatibility (EMC) Laboratory
Sponsor(s)
National Science Foundation (U.S.)
Keywords and Phrases
Cavity Model; Decoupling Capacitor; Equivalent Inductance; Parallel Plates; Partial Element Equivalent Circuit; Partial Inductance; Power Distribution Network; Electric Network Analysis; Equivalent Circuits; Inductance; Parallel Plate; Partial Element Equivalent Circuit (PEEC); Partial Inductance; Power Distribution Network (PDN)
International Standard Serial Number (ISSN)
0018-9480; 1557-9670
Document Type
Article - Journal
Document Version
Citation
File Type
text
Language(s)
English
Rights
© 2011 Institute of Electrical and Electronics Engineers (IEEE), All rights reserved.
Publication Date
01 Aug 2011
Comments
This work was supported by the National Science Foundation (NSF) under Grant 0855878.