Doctoral Dissertations
This collection contains dissertations written in partial fulfillment of the doctoral degree, from 1937 to the present.
The first doctoral degree was in Chemistry, awarded to Frank Joseph Zvanut; his dissertation was titled Pyrochemical changes in Missouri halloysite.. Zvanut had earned his Bachelor of Science in Ceramic Engineering in 1932. Most recently, popular Ph.D. disciplines have included Chemistry, Chemical Engineering, Electrical Engineering, Geological Engineering and Petroleum Engineering.
Theses and dissertations previously submitted in print will be digitized with permission of the author or copyright holder. Missouri S&T Library and Learning Resources encourages graduates to provide this permission so that their work can reach the widest possible audience. If you would like to grant this permission, please use this Form or go to your dissertation in Scholars' Mine and click on the Share My Dissertation button. Theses and dissertations will be digitized as time allows and will not become immediately accessible.
More information on today’s graduate degree programs is available on the Missouri S&T website.
To browse dissertations by academic department, please visit our Browse Collections page.
Dissertations from 1992
The low-temperature sintering behavior of (La,Ca)CrO₃, John David Carter
Enantiomeric separation by high-performance liquid chromatography using cyclodextrin stationary phases, San-Chun Chang
Transition from laminar to turbulent flow around an airfoil, Chang-Ren Chen
Thin film preparation and interfacial reaction study of solid oxide fuel cell materials, Chieh-Cheng Chen
Shrinkage-induced fluid flow and its effect on the formation of macrosegregation during alloy solidification, Jen-Hsin Chen
The software operational requirements specification: a rule-based expert system approach, Ming-Yen Chi
Thermal contact conductance of a phase-mixed coating layer by transitional buffering interface, Kee-Chiang Chung
A study of solid metal reductive stripping involving Cerium(IV) ions, James Donald Dillon
Characterization of pyrite surface and evaluation of effect of absorbed depressants on pyrite flotation, Yungchin Ding
NMR studies of dynamics and structure in surfactant systems, Joseph R. Duke
Creep deformation and mechanical properties of sintered glass and polycrystalline matrix composites, Rollie E. Dutton
A taxonomy-based design methodology for CIM laboratories in engineering education, Winston F. Erevelles
Finite element analysis and experimental evaluation of buckling phenomena in laminated composite tubes and plates, Mahmood Farhadinia
Development of methods for the mapping of outer electron charge density using modern X-ray powder diffraction techniques, Gerald B. Feldewerth
Dynamics of polyacrylates in bulk and adsorbed to a silica surface as determined by deuterium NMR, Robert B. Funchess
Relaxing synchronization in distributed simulated annealing, Chul-Eui Hong
Formation of ceramic composites by free sintering of coated powders, Ching-Li Hu
Displacements in earth slopes under dynamic loading, Shamshad Hussain
Analysis of dynamic shear bands in plane strain compression of dipolar thermoviscoplastic materials by using an adaptively refined mesh, Jungsun Hwang
Atomic collision processes of interest in controlled thermonuclear fusion research, Victor Dewitt Irby
An intelligent decision support system for facility location, Chamnong Jungthirapanich
Two dimensional fin analysis, Hyung Suk Kang
Optical and mechanical properties of optically transparent composites, Seung-Gu Kang
Mineralogy of the ceramic build-ups in channel induction furnaces, Musa Karakus
Ion-induced electron emission from metals, Joseph Francis Kirchhoff
An adaptive mesh refinement technique for two-dimensional problems and its application to the analysis of shear bands, Kwang I. Ko
Low level nitrification with biofilm systems, Chidiadi Hart Kwelle
Fault tolerance in concurrent systems through formal methods, Hanan Lutfiyya
Stereoscopic neuro-vision for three-dimensional object recognition in a manufacturing environment, Mark Bradley Lynch
A methodology for the design of cellular manufacturing systems, Lorace Learmond Massay
A class of entire functions generated by integral transforms: theory and applications, Everett D. McCoy
The modelling, dynamic behavior, and analysis of affinity and perfusion chromatography systems, Mark Alan McCoy
Dynamics of electron removal from helium and molecular hydrogen by collisions with heavy particles, Luzheng Meng
Analysis of matrix damage in unidirectional composites, V. G. Mukunda
Constrained completion: Theory, implementation, and results, Daniel Patrick Murphy
Closed loop map estimation of time varying delay, James C. Myers
Characterization of fiber reinforced phenolic composites, Subramaniam Narayan
Influence of strain rate on the mechanical properties of sheet steels and structural performance of cold-formed steel members, Chi-Ling Pan
An integrated circuit reliability model and its applicability towards improving programmable logic device reliability, James Louis Paunicka
An investigation of crack growth at interfaces in bimaterials and composites using a consistent shear-lag model, David Brian Popejoy
An investigation of the dynamic response of lifting surfaces with concentrated structural nonlinearities, Iyad Khalil Qumei
Adsorption and diffusion of gases and vapors in microporous media, Karthik Raghavan
Robust control of smart structures, Seung-Woo Rhee
An inferencing language system for automated graphic reasoning, Paul Scarponcini
Modeling of intermodulation products for efficient simulation of multi-carrier digital communication systems, Kevin W. Schneider
The management of replicated data, Hsueh-Chi Shih
A priority based simulation model of an Ethernet using an artificial neural network, Michael M. Shoukat
Analysis of robot process capability using animated simulation, Chiu-Chi Wei
Dissertations from 1991
A decision support system for international debt management, Rahim Abbassi
Mathematical models for diffusion in glassy polymers, Farhad Adib
A model study of mixing and mass transfer in a continuous counter-current reactor for metal refining, Ajay Kumar Agrawal
A study of structuration in group decision support systems, Abdul Ghafoor Akram
Z dependence in electron capture by protons, Dean M. Blankenship
D-crackability: a finite element measure, George David Blanpied
Knowledge-based control of a robotic assembly cell: diagnostics and error recovery, Robert Dale Borchelt
Synchronous manufacturing: benefits and barriers for small manufacturers, Susan Hollis Burgess
The effect of temperature and imperfect bonding on the mechanical properties of ceramic matrix composites, Douglas R. Carroll
Modeling of fluid flow and porosity formation during casting solidification, Fon-Chieh Chang
Unconstrained and constrained motion control of a planar two-link structurally-flexible manipulator, Byung-Oh Choi
An intelligent decision support system for naval ship design, Yu-Chao Chou
Effectiveness of a computer-integrated, multi-media learning environment on engineering education, Bonnie Daily
Simulation and evaluation of Reed-Solomon codes in a burst noise environment, William Joseph Ebel
Managing of transformation phases to total quality excellence in a small manufacturing company, Hazim S. El-Baz
Structure and properties of Y₂O₃-Al₂O₃-SiO₂ glasses, Erik M. Erbe
Diffusion of industrial products: empirical estimation of the influence of opinion leadership, Lisa K. Baganoff Gaynor
An electric control center operator's assistant expert system, Nilson Luiz Vital Ge̤s
Automated computer aided stock cutting: irregular two-dimensional pattern generation using simulated annealing algorithm, Alireza Hajakbari
Toughening mechanisms in weak matrix ceramic composites, Jowoong Ha
Texture analysis of skin cancer images, David Earl Harris
An expert system for designing tubular strings, sizing bits, and optimizing the hydraulics plan for planning the drilling of an oil well, Lloyd Richard Heinze
New approaches to enantiomeric separation by high performance liquid chromatography, Martha Lynne Hilton
An intelligent decision support system for construction planning and scheduling, Ossama Ahmed Hosny
Gas permeability measurement of unsaturated fine grained soils, Mohammad Taghi Izadi
Dispersion behavior of aluminum oxide, lanthanum manganite and lanthanum chromite powders in liquids, Feng-Cheng Jang
Analysis of steady state axisymmetric penetration problems by the finite element method using a mixed formulation, R. (Rajarathinam) Jayachandran
Formation of mullite ceramics and composites by a glass-ceramic route, De-Yin Jeng
A model study of heat transfer and fluid flow in slag-cleaning furnaces, Seongwon Kang
Evaluation of uncertainty in geotechnical analysis by means of extended second-moment reliability methods, James M. Keane
A concurrent engineering-based methodology for communication network design in a CIM environment, Doo Yong Kim
Equilibrium, rate studies, and economic evaluation on adsorption and variable-temperature stepwise desorption, Suvit Kulvaranon
Processing-microstructure-dielectric property relations of Pb(Fe1/2Nb1/2)O₃ - Pb(Fe2/3W1/3)O₃ - based ceramics, Cheng-Hwa Liu
Reinforcement in ceramic matrix composites, Jenq Liu
Enantiomeric separation by capillary gas chromatography using derivatized cyclodextrin stationary phases, Weiyong Li
Use of voids to stabilize dislocation networks at elevated temperatures in aluminum single crystals, Purushottam G. Manusmare
Toward the development of decision support tools to manage the CATIS project life cycle, Steven Wayne McCrary
Convergence of Fourier series and representations of Fourier and Fourier-Stieltjes coefficients, Dimitrios G. Natsis
Effects of I/Q arm unbalance on Costas phase-locked loops, John Paul Oliver
The mechanical properties of tightly woven carbon-carbon composites, Abdullah Ozturk
An application of the boundary element method to two-dimensional sound propagation over an irregular topography, Jong Moo Park
Displacement based design of rigid retaining walls subjected to dynamic loads considering soil nonlinearity, E. Arni Rafnsson
Characterizing backpropagation neural network architecture response to domain entropy: implementation with a fuzzy logic based expert system, Alice E. Smith
The electrodeposition of metals and alloys using pulsed current, Chong Ho Sonu
