Experimental Study of Transfer and Development Length of Fiber Reinforced Polymer Prestressing Strands
Abstract
An experimental study was conducted to determine the transfer length, development length and flexural behavior of fiber-reinforced polymer (FRP) tendons in prestressed concrete beams. Three kinds of nominally 5116 in (8 mm) diameter FRP tendons were included in the study: Carbon Leadline, Aramid Technora and Carbon Strawman. Thirty beams were pretensioned using a single FRP tendon. In addition, twelve control beams were pretensioned with a seven-wire steel strand (ST). Transfer length observations from this study were based on concrete strain measurements with a DEMEC gage system. Development length observations were based on three-point flexural tests. Four-point flexure tests were also performed on each material to gain additional understanding of the bond behavior between concrete and the PC reinforcing materials. The "95% average plateau strain" method of using concrete strain results was shown to be an effective way to determine transfer length. By using an appropriate flexural model and extrapolating results from over-reinforced tests to situations where the tendon would actually faiL it was possible to determine development length in this investigation. Despite differences in tendon material properties and prestressing forces, both the measured transfer lengths and the development lengths were almost identical for all tendon materials tested. The development length for FRP tendons was reasonably predicted by the ACI design equation, although transfer length appears to be underestimated.
Recommended Citation
Z. Lu et al., "Experimental Study of Transfer and Development Length of Fiber Reinforced Polymer Prestressing Strands," American Concrete Institute, ACI Special Publication, vol. SP thru 188, pp. 781 - 789, American Concrete Institute, Aug 1999.
Department(s)
Civil, Architectural and Environmental Engineering
Keywords and Phrases
Bond; Development; Fiber reinforced polymers; Flexure; Length; Prestressing; Strength
International Standard Book Number (ISBN)
978-087031687-6
International Standard Serial Number (ISSN)
0193-2527
Document Type
Article - Conference proceedings
Document Version
Citation
File Type
text
Language(s)
English
Rights
© 2024 American Concrete Institute, All rights reserved.
Publication Date
01 Aug 1999
Comments
Federal Highway Administration, Grant DTFH6I-96-C-OOOI9