Recommended procedures for conducting pull-over, pull-out and single-shear tests of mechanical connections

Author

John Fraczek
George Winter
Teoman Peköz

Abstract

1. SCOPE 1.1 These methods cover procedures and definitions for the mechanical testing of joints formed by connecting a cold-formed steel member to a cold-formed or hot-rolled steel member with one or more mechanical fasteners. The purpose of these procedures is the determination of the load capacities of the joints so formed. 1.2 The term "mechanical fastener" or "fastener" shall be defined as any mechanical device used in the connection of two or more members, inclusive of such devices as bolts, tapping screws and rivets but exclusive of welds and adhesives. 1.3 The following mechanical tests are described: Sections Pull-Over 4-11, Pull-Out 12-19, Single-Shear (Lap Joint) 20-26, Single-Shear (Simulated Diaphragm Action) 27-34.

Department(s)

Civil, Architectural and Environmental Engineering

Sponsor(s)

American Iron and Steel Institute

Research Center/Lab(s)

Wei-Wen Yu Center for Cold-Formed Steel Structures

Publication Date

01 Dec 1973

Document Version

Final Version

Comments

Second Progress Report

Document Type

Technical Report

File Type

text

Language(s)

English

Recommended Citation

Fraczek, John; Winter, George; and Peköz, Teoman, "Recommended procedures for conducting pull-over, pull-out and single-shear tests of mechanical connections" (1973). CCFSS Library (1939 - present). 134.
https://scholarsmine.mst.edu/ccfss-library/134