American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
Submissions from 1995
Thermal Design Guide for Exterior Walls, Steel in Residential Construction Advisory Group
Submissions from 1993
Preliminary Design Guide for Cold-formed Steel C- And Z-members, Committee on Specifications for the Design of Cold-Formed Steel Structural Members
Submissions from 1992
Axial Load Capacity of Sheeted Cold-formed C and Z Members, Neil J. Glaser, Richard C. Kaehler, and James M. Fisher
Design Provisions for Cold-formed Steel Column and Beam Columns, Committee on Specifications for the Design of Cold-Formed Steel Structural Members
Shear Resistance of Walls with Steel Studs, K. H. Klippstein and Thomas S. Tarpy Jr.
Test Methods for Mechanically Fastened Cold-formed Steel Connections, Committee on Specifications for the Design of Cold-Formed Steel Structural Members
Submissions from 1991
Preliminary Design Guide for Cold-formed C- and Z-members, Committee on Specifications for the Design of Cold-Formed Steel Structural Members
LRFD Cold-formed Steel Design Manual, American Iron and Steel Institute
Submissions from 1986
Development of a Unified Approach to the Design of Cold-formed Steel Members, Teoman Peköz
Development of a Unified Approach to the Design of Cold-formed Steel Members (Draft), Teoman Peköz
Cold-formed Steel Design Manual, American Iron and Steel Institute
Submissions from 1984
Designing Fire Protecton for Steel Beams, American Iron and Steel Institute and Subcommittee on Fire Technology of the Committee on Construction Codes and Standards
Submissions from 1983
Cold-formed Steel Design Manual, American Iron and Steel Institute
Submissions from 1982
Seismic Design for Buildings, Department of the Army, The Navy, and the Air Force
Submissions from 1981
Designing Fire Protection for Steel Trusses, Subcommittee on Fire Technology of the Committee on Construction Codes and Standards and American Iron and Steel Institute
Fire Protection Through Modern Building Codes, 5th Edition, James C. Spence, Walter G. Wells, and D. F. Boring
Fire Resistance Ratings of Load-bearing Steel Stud Walls, Subcommittee on Fire Technology of the Committee on Construction Codes and Standards
Fire Resistance Ratings of Load Bearing Steel Stud Walls with Gypsum Wallboard Protection, American Iron and Steel Institute
Submissions from 1979
Plastic Analysis and Tests for Rigid High-rise Composite Frames, J. Hartley Daniels, Dirk P. duPlessis, and Thomas Wenk
The Variations of Charpy V-Notch Impact Test Properties In Steel Plates, AISI Technical Committee on Plates and Shapes
Welding of Sheet Steel, Teoman Peköz and William McGuire
Submissions from 1978
Strength of Arc-Spot Weld in Sheet Steel Construction, Ching Fung
Submissions from 1977
Report of Laboratory Tests and Analytical Sudies of Structural Characteristics of Cold-formed Steel-joist Floor Systems, J. F. Wiss, P. W. Linehan, and R. J. Kudder
Submissions from 1975
Designing Fire Protection for Steel Columns, Subcommittee on Fire Technology and Committee on Construction Codes and Standards
Submissions from 1971
Current Mechanical Fastener Specifications and Test Procedure, John Fraczek
Submissions from 1970
Commentary on the 1968 Edition of the Specification for the Design of Cold-formed Steel Structural Members, George Winter
Submissions from 1969
Further Investigation of Light Gage Steel Forms As Reinforcement for Concrete Slabs, C. E. Ekberg Jr., R. M. Schuster, and Max L. Porter
Submissions from 1968
Response of Multistory Steel Frames to Earthquake Forces, Subhash C. Goel
Response of Steel Frames to Earthquake Forces, M. J. Kaldjian and Wm. R. S. Fan
Specification for the Design of Cold-formed Steel Structural Members, American Iron and Steel Institute
Submissions from 1967
Strength and Behavior of Light-gage Steel Shear Diaphragms, Larry D. Luttrell
Submissions from 1962
Commentary on the 1962 Edition, George Winter
Specification for the Design of Light Gage Cold-formed Steel Structural Members, American Iron and Steel Institute
Submissions from 1961
Commentary on the 1961 Edition, George Winter
Light Gage Cold-formed Steel Design Manual, American Iron and Steel Institute
Submissions from 1960
Specification for the Design of Light Gage Cold-formed Steel Structural Members, American Iron and Steel Institute
Submissions from 1956
Light Gage Cold-formed Steel Design Manual, American Iron and Steel Institute
Submissions from 1949
Light Gage Steel Design Manual, American Iron and Steel Institute
Submissions from 1946
Specification for the Design of Light Gage Steel Structural Members, American Iron and Steel Institute
