"The purpose of this study was to investigate the effect of processing and additives on the properties of the Pb(Fe1/2Nb1/2)O3-PB(Fe2/3W1/3)O3 solid solutions. The basic composition was 70 m% Pb(Fe1/2Nb1/2)O3 and 30 m% Pb(Fe2/3W1/3)O3. The additives used were MnO, PbO and ZnNbO₆. Pressed compacts were sintered over the temperature range 900'C to 1050°C for 1 to 5 hours.
The influence of processing and composition on the properties was determined by measurement of density, shrinkage, dielectric constant, dissipation factor and resistivity. The microstructures of the sintered specimens were examined by X-ray diffraction and scanning electron microscopy"--Abstract, page ii.
Anderson, H. U. (Harlan U.)
Guha, Jyoti, P.
Sparlin, Don M.
Materials Science and Engineering
M.S. in Ceramic Engineering
University of Missouri--Rolla
viii, 53 pages
© 1988 Weih-Min Liao, All rights reserved.
Thesis - Restricted Access
Print OCLC #
Electronic OCLC #
Link to Catalog RecordElectronic access to the full-text of this document is restricted to Missouri S&T users. Otherwise, request this publication directly from Missouri S&T Library or contact your local library. http://laurel.lso.missouri.edu/record=b2140401~S5
Liao, Weih-Min, "The effect of additives on properties of PFN-PFW dielectric materials" (1988). Masters Theses. 716.
Share My Thesis If you are the author of this work and would like to grant permission to make it openly accessible to all, please click the button above.