Laser-Foil-Printing (LFP) is a novel laminated object manufacturing process for metal additive manufacturing. It fabricates three-dimensional metal parts by using a dual-laser system to weld and cut metal foils layer by layer. A main advantage of LFP is the higher cooling rate compared to powder-based laser additive manufacturing processes due to the thermal conductivity difference between foil and powder. This study focuses on the mechanical properties of 304L stainless steel parts built by the LFP process. The experimental results indicate that the yield strength and ultimate tensile strength of LFP fabricated 304L SS parts are higher by 9% and 8% in the longitudinal direction, and 24% and 25% in the transverse direction, respectively, in comparison to the parts fabricated by the selective laser melting process. X-ray diffraction and electron backscattered diffraction are used to obtain the lattice structure and the grain size of the fabricated parts.
C. Hung et al., "Mechanical Properties of 304L Parts Made by Laser-Foil-Printing Technology," Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium (2017, Austin, TX), pp. 1833-1845, University of Texas at Austin, Aug 2017.
28th Annual International Solid Freeform Fabrication Symposium -- An Additive Manufacturing Conference, SFF 2017 (2017: Aug. 7-9, Austin, TX)
Mechanical and Aerospace Engineering
Intelligent Systems Center
Article - Conference proceedings
09 Aug 2017