Anode Supported Single Chamber Solid Oxide Fuel Cell in Methane - Air Mixture
In this study, yttrium-stabilized zirconia (YSZ) thin films 1-2 µm thick electrolyte have been prepared using NiO-YSZ anode as substrates. Fuel cell test was conducted with the single chamber configuration in methane-air gas mixture using (La,Sr)(Co,Fe)O3 (LSCF) as the cathode. Test results showed that the open-circuit voltage to be >0.8 V, with power density as high as 0.12 W cm-2. It was also shown that gas flow rate has a large influence on the performance of the fuel cell, which indicates the importance of the geometrical design for anode support fuel cell system.
T. Suzuki et al., "Anode Supported Single Chamber Solid Oxide Fuel Cell in Methane - Air Mixture," Journal of The Electrochemical Society, The Electrochemical Society (ECS), Jan 2004.
The definitive version is available at https://doi.org/10.1149/1.1782141
Materials Science and Engineering
United States. Department of Energy
University of Missouri-Rolla Research Board
Keywords and Phrases
Electrochemical Electrodes; Liquid Phase Deposition; Cobalt compounds; Electrolytes; Lanthanum compounds; Nickel compounds; Solid oxide fuel cells; Strontium compounds
International Standard Serial Number (ISSN)
Article - Journal
© 2004 the Electrochemical Society (ECS), All rights reserved.
01 Jan 2004