Keywords and Phrases
Bath Tub Curves; Compliance Reports; Eye Diagram; Insertion Loss Deviation; Insertion Loss Fits; Rise Time
"As the demands on the industry data rates have increased there is a need for interoperable interfaces to function flawlessly. Added to this complexity, the number of I/O data lines are also increasing making it more time consuming to design and test. This in general leads to creating of compliance standards to which interfaces must adhere. The goal of this theses is to aid the Signal Integrity Engineers with a better and fast way of rendering a full picture of the interface compliance parameters.
Three different interfaces at various data rates were chosen. They are: 25Gbps Very Short Reach (VSR) based on Optical Internetworking Forum (OIF), Mobile Industry Processer Interface (MIPI) particularly for camera based on MIPI Alliance organization upto 1.5Gbps and for a passive Universal Serial Bus (USB) Type-C cable based on USB organization particularly for generation-I with data rate of 10Gbps. After a full understanding of each of the interfaces, a complete end-to-end reports for each of the interfaces were developed with an easy to use user interface. A standard one-to-one comparison is done with commercially available software tools for the above mentioned interfaces. The tools were developed in MATLAB and Python. Data was usually obtained by probing at interconnect, from either an oscilloscope or vector network analyzer"--Abstract, page iii.
Fan, Jun, 1971-
Electrical and Computer Engineering
M.S. in Electrical Engineering
Missouri University of Science and Technology
x, 38 pages
Note about bibliography
Includes bibliographical references (page 37).
© 2017 Srinath Penugonda
Thesis - Open Access
Electronic OCLC #
Penugonda, Srinath, "Generating fast and accurate compliance reports for various data rates" (2017). Masters Theses. 7655.