"A typical lead sinter machine feed can be pelletized in a drum pelletizer using tap water as a binding liquid. The green pellets produced have return sinter as cores, and an outer layer of new material and fluxes. The moisture content of the pellets produced is about 5%. The pelletizing procedure developed used raw materials from the Amax Lead Smelter, with only a minor amount of feed preparation. The importance of proper moisture control, use of binders, method of adding moisture, speed of pelletizing drum, etc. were investigated. The stability of pellets under extreme storage conditions was also determined"--page ii.
Morris, Arthur E., 1935-
Sorrell, Charles A.
Materials Science and Engineering
M.S. in Metallurgical Engineering
Amax Lead Company of Missouri
University of Missouri--Rolla
vii, 40 pages
© 1979 Hung-Yang Tsai, All rights reserved.
Thesis - Restricted Access
Print OCLC #
Electronic OCLC #
Link to Catalog Record
Electronic access to the full-text of this document is restricted to Missouri S&T users. Otherwise, request this publication directly from Missouri S&T Library or contact your local library.http://merlin.lib.umsystem.edu/record=b1064310~S5
Tsai, Hung-Yang, "Pelletizing of a lead sinter machine feed" (1979). Masters Theses. 3687.
Share My Thesis If you are the author of this work and would like to grant permission to make it openly accessible to all, please click the button above.