Quantifying radiated emissions from high speed traces in proximity to a PCB edge
"A printed circuit board (PCB) design commonly requires high-speed traces to be routed away from the edge of the board. The effects of routing traces with high-speed components are not fully understood. This research focuses on quantifying the effects of high-speed traces routed near the board edge. Experimental work and full-wave numerical modeling are used to understand the behavior of high-speed traces near a board edge."--Abstract, leaf iii.
Electrical and Computer Engineering
M.S. in Electrical Engineering
University of Missouri--Rolla
viii, 47 leaves
© 2004 Daniel Patrick Berg, All rights reserved.
Thesis - Citation
Library of Congress Subject Headings
Electronic circuit design
Printed circuits -- Design and construction
Radiation -- Measurement -- Mathematical models
Print OCLC #
Link to Catalog Record
Full-text not available: Request this publication directly from Missouri S&T Library or contact your local library.http://laurel.lso.missouri.edu/record=b5283687~S5
Berg, Daniel P., "Quantifying radiated emissions from high speed traces in proximity to a PCB edge" (2004). Masters Theses. 2645.
Share My Thesis If you are the author of this work and would like to grant permission to make it openly accessible to all, please click the button above.