November 16-17, 1982 (St. Louis, Missouri)

Presented by: Department of Civil Engineering University of Missouri - Rolla

Sponsored by: American Iron and Steel Institute Metal Building Manufacturers Association Steel Deck Institute University of Missouri - Rolla Engineering Continuing Education

In Cooperation with: ASCE Committee on Cold-Formed Steel Members Canadian Sheet Steel Building Institute, Canada Rack Manufacturer's Institute Structural Stability Research Council Task Group on Thin-Walled Metal Construction University of Strathclyde, Scotland e

Edited by: Wei-Wen Yu and Joseph H. Senne

Conference Directors: Wei-Wen Yu, Professor of Civil Engineering, University of Missouri - Rolla; Chairman, Structural Stability Research Council Task Group on Thin-Walled Metal Construction Joseph H. Senne, Chairman and Professor of Civil Engineering, University of Missouri-Rolla

Planning Committee: D.S. Ellifritt - Representative of Metal Building Manufacturers Association S.J. Errera - Bethlehem Steel Corporation; Adviser R.B. Healger - Nicholas J. Bouras, Inc.; Representative of SDI A.L. Johnson - AISI; Adviser D.L. Johnson - Butler Manufacturing Company; Adviser H. Klein - Unarco Industries, Inc.; Representative of the RMI K.H. Klippstein - United States Steel Corporation; Representative of the AISI Building Construction Department J. Rhodes - Representative of the University of Strathclyde, Scotland W.L. Ries - UMR; Representative of the UMR Engineering Continuing Education P.A. Seaburg - Armco Inc.; Representative of the ASCE Committee on Cold-Formed Members J.H. Senne - UMR; Representative of the UMR Department of Civil Engineering D.L. Tarlton - Representative of CSSBI, Canada G. Winter - Cornell University; Adviser D.S. Wolford - Private Consultant; Adviser W.W. Yu - UMR; Representative of the SSRC Task Group on Thin-Walled Metal Construction

Browse the contents of (1982) - 6th International Specialty Conference on Cold-Formed Steel Structures:

Introduction
Session 01: Design Method Developments
Session 02: Buckling of Plates and Curved Panels
Session 03: Stability and Postbuckling Behavior of Beam Elements
Session 04: Flexural Members
Session 05: Compression Members
Session 06: Frames
Session 07: Shear Diaphragms
Session 08: Diaphragm-Braced Structural Members
Session 09: Composite Design
Session 10: Rack Structures
Session 11: Special Applications
Session 12: Steel Buildings