Distribution Of Polymer Deposition In Glow Discharge Polymerization In A Capacitively Coupled System
Abstract
The manner by which polymers created by plasma uniformly deposit onto substrates was sought. By rotating the substrate placed midway between electrodes, completely uniform distribution of polymer deposition was accomplished, and the deviation of the polymer deposition in a radius direction of the rotating substrate was within experimental errors. Materials of the substrate on which the polymer deposited had no influence on uniformity of polymer deposition, but the electrical circuit of power source, i.e., grounding an electrode, markedly disturbed the uniformity. Thickness of polymers deposited on the substrate was linearly proportional to reaction time. Surface energies of deposited polymers prepared from methane, ethylene, and acetylene by plasma were independent of reaction time and were rather higher than those for conventionally polymerized polyolefins. Copyright © 1981 John Wiley & Sons, Inc.
Recommended Citation
N. Inagaki and H. Yasuda, "Distribution Of Polymer Deposition In Glow Discharge Polymerization In A Capacitively Coupled System," Journal of Applied Polymer Science, vol. 26, no. 10, pp. 3425 - 3433, Wiley, Jan 1981.
The definitive version is available at https://doi.org/10.1002/app.1981.070261021
Department(s)
Chemistry
Publication Status
Full Access
International Standard Serial Number (ISSN)
1097-4628; 0021-8995
Document Type
Article - Journal
Document Version
Citation
File Type
text
Language(s)
English
Rights
© 2023 Wiley, All rights reserved.
Publication Date
01 Jan 1981
