"A method has been presented to measure the demagnetizing factor of ring-cores. First the incremental apparent permeability and the incremental true permeability were measured at different degrees of saturation and then the demagnetizing factor was determined from those results. The cores used were tape would ring-cores of mean length of 8.0 cm. The method was found suitable for cores with 1/4 mil or thicker tape, but was in question for the 1/8 mil tape core tested"--Abstract, page ii.
Marshall, S. V., 1927-1999
McPherson, George, 1921-2017
Sparlin, Don M.
Electrical and Computer Engineering
M.S. in Electrical Engineering
University of Missouri--Rolla
vi, 45 pages
© 1968 Subhashcandra Chimanlal Patel, All rights reserved.
Thesis - Open Access
Library of Congress Subject Headings
Electromagnetic fields -- Permeability -- Measurement
Print OCLC #
Electronic OCLC #
Link to Catalog Recordhttp://laurel.lso.missouri.edu/record=b1067530~S5
Patel, Subhashchandra Chimanlal, "Measurement of demagnetizing factor of ring-core" (1968). Masters Theses. 5273.