Critical load for a rectangular plate simply supported on three edges, built in on the fourth edge, and compressed on two opposite simply supported edges by a load in the plane of the plate

Author

Bert Louis Smith

Abstract

"There are many engineering structures in which thin plates are used extensively, some examples of which can be found in ship and airplane structures, bridges, etc. The problem contained in this thesis is the analysis of a thin rectangular plate simply supported on three edges, built in on the fourth edge, and compressed on two opposite simply supported edges by a load in the plane or the plate. This problem becomes one of stability, and the object of the solution is to find the smallest load that will cause the plate to buckle"--Introduction, page vi.

Advisor(s)

Miles, Aaron J.

Committee Member(s)

Schowalter, Ralph E., 1923-2001
Davidson, Robert F., 1911-1971
Lee, Ralph E., 1921-2010

Department(s)

Mechanical and Aerospace Engineering

Degree Name

M.S. in Mechanical Engineering

Publisher

Missouri School of Mines and Metallurgy

Publication Date

1960

Pagination

viii, 16 pages

Rights

© 1960 Bert Louis Smith, All rights reserved.

Document Type

Thesis - Open Access

File Type

text

Language

English

Subject Headings

Plates (Engineering) -- Stability -- Mathematical models
Loads (Mechanics)
Stress concentration

Thesis Number

T 1235

Print OCLC #

5928266

Electronic OCLC #

961474267

Link to Catalog Record

http://merlin.lib.umsystem.edu/record=b2610164~S5

Recommended Citation

Smith, Bert Louis, "Critical load for a rectangular plate simply supported on three edges, built in on the fourth edge, and compressed on two opposite simply supported edges by a load in the plane of the plate" (1960). Masters Theses. 2687.
https://scholarsmine.mst.edu/masters_theses/2687