Hierarchical Optimal Force-Position Control of a Turning Process

B. Pandurangan
Robert G. Landers, Missouri University of Science and Technology
S. N. Balakrishnan, Missouri University of Science and Technology

This document has been relocated to http://scholarsmine.mst.edu/mec_aereng_facwork/3435

There were 12 downloads as of 28 Jun 2016.


Machining process control technologies are currently not well integrated into machine tool controllers and, thus, servomechanism dynamics are often ignored when designing and implementing process controllers. In this brief, a hierarchical controller is developed that simultaneously regulates the servomechanism motions and cutting forces in a turning operation. The force process and servomechanism system are separated into high and low levels, respectively, in the hierarchy. The high-level goal is to maintain a constant cutting force to maximize productivity while not violating a spindle power constraint. This goal is systematically propagated to the lower level and combined with the low-level goal to track the reference position. Since the only control signal (i.e., motor voltage) resides at the lower level, a single controller is designed at the bottom level that simultaneously meets both the high- and low-level goals. Simulations are conducted that validate the developed methodology. The results illustrate that the controller can simultaneously achieve the low-level position tracking goal and the high-level force-tracking goal.