Missouri S&T Scholar's Mine Research RepositoryMissouri S&T Research
print 
Title: Synthesis of homogeneous alloy metal nanoparticles in slica aerogels
Author (s): Hund, J.F.
Bertino, Massimo
Zhang, G.
Sotiriou-Leventis, Lia
Leventis, Nicholas
Department/Lab Affiliations: Chemistry
Subject Terms: Aerogels.
Gold.
Nanoparticles.
Silver.
Issue Date: 2004
Publisher: Elsevier
Citation: Bertino, Massimo, Leventis, Nicholas, Sotiriou-Leventis, C., J.F. Hund, and G. Zhang Synthesis of Homogeneous Alloy Metal Nanoparticles in Silica Aerogels, Journal of Non-Crystalline Solids, Vol. 350, pp. 9-13, 2004.
Abstract: Homogeneous alloy nanoparticles of the noble metals gold and silver were formed in silica aerogels. In our synthesis procedure, silica aquogels were first prepared with a standard base-catalyzed route, washed several times with distilled water, and then bathed in an aqueous solution with a total metal ion concentration of 3 × 10−4 M. Formaldehyde (0.5 M) was then added as a reducing agent, with NaOH, in a typical concentration of 1–2 mM, employed to control the velocity of reduction. After reduction, the gels were washed, and then dried supercritically (from CO2) to yield aerogels. The optical absorption of the gels exhibits a single plasmon peak that shifts linearly to higher wavelengths when the Au mole ratio is increased. These results indicate that bimetallic nanoparticles are formed, and that the metals are homogeneously alloyed. Transmission electron microscopy shows that the diameter of the metal nanoparticles depends on the molar ratio of metals used in the bathing solution of the aquogel precursor, and ranges from a minimum of not, vert, similar20 nm (100% Au sample) to a maximum of 70–80 nm (25 at.% Au). Energy-dispersive X-ray analysis confirms that the nanoparticles are bimetallic, with a mean mole ratio within 15% of the bathing solution
Type: Article - Journal
text
In Title: Journal of Non-Crystalline Solids
Copyright Notice: Pre-print: author can archive with restrictions;Restriction: This does not include Cell Press; Post-print: author can archive;
This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.
FULL COPYRIGHT INFORMATION:
http://www.elsevier.com/wps/find/authorsview.authors/authorsrights
Publisher URL:
http://dx.doi.org/10.1016/j.jnoncrysol.2004.06.037
Link to this page:
http://scholarsmine.mst.edu/post_prints/SynthesisOHomogeneousMetalAlloyClustersI_09007dcc805162ee.html



titleSynthesis of homogeneous alloy metal nanoparticles in slica aerogels
contributor.authorHund, J.F.
contributor.authorBertino, Massimo
contributor.authorZhang, G.
contributor.authorSotiriou-Leventis, Lia
contributor.authorLeventis, Nicholas
contributor.deptlabChemistry
subject.LCSHAerogels.
subject.LCSHGold.
subject.LCSHNanoparticles.
subject.LCSHSilver.
date.issued2004
publisherElsevier
identifier.citationBertino, Massimo, Leventis, Nicholas, Sotiriou-Leventis, C., J.F. Hund, and G. Zhang Synthesis of Homogeneous Alloy Metal Nanoparticles in Silica Aerogels, Journal of Non-Crystalline Solids, Vol. 350, pp. 9-13, 2004.
identifier.pub.URI
http://dx.doi.org/10.1016/j.jnoncrysol.2004.06.037
description.abstractHomogeneous alloy nanoparticles of the noble metals gold and silver were formed in silica aerogels. In our synthesis procedure, silica aquogels were first prepared with a standard base-catalyzed route, washed several times with distilled water, and then bathed in an aqueous solution with a total metal ion concentration of 3 × 10−4 M. Formaldehyde (0.5 M) was then added as a reducing agent, with NaOH, in a typical concentration of 1–2 mM, employed to control the velocity of reduction. After reduction, the gels were washed, and then dried supercritically (from CO2) to yield aerogels. The optical absorption of the gels exhibits a single plasmon peak that shifts linearly to higher wavelengths when the Au mole ratio is increased. These results indicate that bimetallic nanoparticles are formed, and that the metals are homogeneously alloyed. Transmission electron microscopy shows that the diameter of the metal nanoparticles depends on the molar ratio of metals used in the bathing solution of the aquogel precursor, and ranges from a minimum of not, vert, similar20 nm (100% Au sample) to a maximum of 70–80 nm (25 at.% Au). Energy-dispersive X-ray analysis confirms that the nanoparticles are bimetallic, with a mean mole ratio within 15% of the bathing solution
typeArticle - Journal
type.DCMITypetext
type.statusPostprint
rightsPre-print: author can archive with restrictions;Restriction: This does not include Cell Press; Post-print: author can archive;
rightsThis material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.
rights.URI
http://www.elsevier.com/wps/find/authorsview.authors/authorsrights
relation.isPartOfJournal of Non-Crystalline Solids
date.available2008-06-17T20:54:22Z
identifier.persist.URI
http://scholarsmine.mst.edu/post_prints/SynthesisOHomogeneousMetalAlloyClustersI_09007dcc805162ee.html