Scholars' Mine
Missouri S&T
Research Repository
Curtis Laws Wilson Library
400 W. 14th Street
Rolla, MO 65409-0060
scholarsmine@mst.edu
| Title: | Dynamic wrinkling in sandwich beams |
| Author (s): | Birman, Victor |
| Department/Lab Affiliations: | Center for Infrastructure Engineering Studies Engineering Education Center at St. Louis |
| Keywords: | sandwich beams and panels |
| Issue Date: | 2004 |
| Publisher: | Elsevier |
| Citation: | Birman, Victor “Dynamic Wrinkling in Sandwich Beams” Composites Part B: Engineering, vol. 35, no. 6-8, 2004, pp. 665-672. |
| Abstract: | Facings of sandwich structures employed in typical applications are often subject to parametric periodic loading. Such loading can cause local dynamic instability of the facings, i.e. large-amplitude small wavelength lateral vibrations. This phenomenon, called in the paper dynamic wrinkling, may result in fatigue damage or immediate failure. The problem of dynamic wrinkling of the facings is analyzed in the present paper for sandwich beams and for large aspect ratio wide panels that vibrate forming a cylindrical surface. The solution is obtained for the case of a relatively thick or compliant core where the Winkler elastic foundation model of the core is applicable. In addition, the problem is formulated as an extension of the Plantema core model that may be preferable for thinner and stiffer cores. In addition, a new simplified elasticity model is introduced in the paper that is based on the assumption that both facings experience simultaneous and interactive dynamic wrinkling instability. Numerical results shown for the elastic foundation model include the criterion for the onset of dynamic wrinkling and the critical value of the damping coefficient of the facing that is sufficient to prevent such wrinkling. As follows from these results, dynamic wrinkling is unlikely in most engineering applications, except for the case in which the maximum stresses in the facing approach the static wrinkling value. |
| Type: | Article - Journal text |
| In Title: | Composites Part B: Engineering |
| Copyright Notice: | This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. Pre-print: author can archive; Post-print: author can archive; FULL COPYRIGHT INFORMATION: |
| Publisher URL: | |
| Link to this page: |
| title | Dynamic wrinkling in sandwich beams |
| contributor.author | Birman, Victor |
| contributor.deptlab | Center for Infrastructure Engineering Studies |
| contributor.deptlab | Engineering Education Center at St. Louis |
| contributor.sponsor | Office of Naval Research |
| subject | sandwich beams and panels |
| date.issued | 2004 |
| publisher | Elsevier |
| identifier.citation | Birman, Victor “Dynamic Wrinkling in Sandwich Beams” Composites Part B: Engineering, vol. 35, no. 6-8, 2004, pp. 665-672. |
| identifier.pub.URI | |
| description.abstract | Facings of sandwich structures employed in typical applications are often subject to parametric periodic loading. Such loading can cause local dynamic instability of the facings, i.e. large-amplitude small wavelength lateral vibrations. This phenomenon, called in the paper dynamic wrinkling, may result in fatigue damage or immediate failure. The problem of dynamic wrinkling of the facings is analyzed in the present paper for sandwich beams and for large aspect ratio wide panels that vibrate forming a cylindrical surface. The solution is obtained for the case of a relatively thick or compliant core where the Winkler elastic foundation model of the core is applicable. In addition, the problem is formulated as an extension of the Plantema core model that may be preferable for thinner and stiffer cores. In addition, a new simplified elasticity model is introduced in the paper that is based on the assumption that both facings experience simultaneous and interactive dynamic wrinkling instability. Numerical results shown for the elastic foundation model include the criterion for the onset of dynamic wrinkling and the critical value of the damping coefficient of the facing that is sufficient to prevent such wrinkling. As follows from these results, dynamic wrinkling is unlikely in most engineering applications, except for the case in which the maximum stresses in the facing approach the static wrinkling value. |
| type | Article - Journal |
| type.DCMIType | text |
| type.status | Postprint |
| rights | This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. |
| rights | Pre-print: author can archive; Post-print: author can archive; |
| rights.URI | |
| relation.isPartOf | Composites Part B: Engineering |
| date.available | 2008-09-30T20:34:02Z |
| identifier.persist.URI |