Scholars' Mine
Missouri S&T
Research Repository
Curtis Laws Wilson Library
400 W. 14th Street
Rolla, MO 65409-0060
scholarsmine@mst.edu
| Title: | Demodulation of extrinsic Fabry-Pérot interferometric sensors for vibration testing using neural networks |
| Author (s): | Dua, Rohit. Watkins, Steve E. Wunsch, Donald C. |
| Department/Lab Affiliations: | Applied Computational Intelligence Laboratory Electrical and Computer Engineering |
| Keywords: | Strain level measurement back-propagation neural networks extrinsic Fabry-Pérot interferometric (EFPI) strain sensor nonlinear sensor output simple demodulation system |
| Issue Date: | 2004-06-04 |
| Publisher: | Society of Photo-Optical Instrumentation Engineers |
| Citation: | Dua, Rohit., Steve E. Watkins, and Donald C. Wunsch. "Demodulation of Extrinsic Fabry-Perot Interferometric Sensors for Vibration Testing Using Neural Networks." Optical Engineering, 43, (2004). |
| Abstract: | Strain level measurement on a periodically actuated and instrumented structure can provide information about the health of that structure. A simple demodulation system employing artificial neural networks (ANNs) is analyzed for an extrinsic Fabry-Pérot interferometric (EFPI) strain sensor. The harmonic content of the nonlinear sensor output for the sinusoidal strain case is used to predict the maximum strain level. Implementations of the demodulation system are demonstrated for both simulated and experimental data using back-propagation neural networks. The simulation uses the theoretical response of the EFPI sensor and the experiment uses an EFPI-instrumented smart composite beam to obtain training and testing data. Excitation is provided by a piezoelectric actuator operating from 50 Hz to 1 kHz. System performance is compared for two-stage and single-stage networks and for differing types of data preprocessing. The ANN systems successfully extract the signal harmonics and predict the peak strain levels. Data preprocessing using principal component analysis produces the best accuracy. The architecture of an EFPI-based health monitoring system is proposed. |
| Type: | Article - Journal text |
| In Title: | Optical Engineering |
| Copyright Notice: | This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. FULL COPYRIGHT INFORMATION: |
| Publisher URL: | |
| Link to this page: |
| title | Demodulation of extrinsic Fabry-Pérot interferometric sensors for vibration testing using neural networks |
| contributor.author | Dua, Rohit. |
| contributor.author | Watkins, Steve E. |
| contributor.author | Wunsch, Donald C. |
| contributor.deptlab | Applied Computational Intelligence Laboratory |
| contributor.deptlab | Electrical and Computer Engineering |
| subject | Strain level measurement |
| subject | back-propagation neural networks |
| subject | extrinsic Fabry-Pérot interferometric (EFPI) strain sensor |
| subject | nonlinear sensor output |
| subject | simple demodulation system |
| date.issued | 2004-06-04 |
| publisher | Society of Photo-Optical Instrumentation Engineers |
| identifier.citation | Dua, Rohit., Steve E. Watkins, and Donald C. Wunsch. "Demodulation of Extrinsic Fabry-Perot Interferometric Sensors for Vibration Testing Using Neural Networks." Optical Engineering, 43, (2004). |
| identifier.pub.URI | |
| description.abstract | Strain level measurement on a periodically actuated and instrumented structure can provide information about the health of that structure. A simple demodulation system employing artificial neural networks (ANNs) is analyzed for an extrinsic Fabry-Pérot interferometric (EFPI) strain sensor. The harmonic content of the nonlinear sensor output for the sinusoidal strain case is used to predict the maximum strain level. Implementations of the demodulation system are demonstrated for both simulated and experimental data using back-propagation neural networks. The simulation uses the theoretical response of the EFPI sensor and the experiment uses an EFPI-instrumented smart composite beam to obtain training and testing data. Excitation is provided by a piezoelectric actuator operating from 50 Hz to 1 kHz. System performance is compared for two-stage and single-stage networks and for differing types of data preprocessing. The ANN systems successfully extract the signal harmonics and predict the peak strain levels. Data preprocessing using principal component analysis produces the best accuracy. The architecture of an EFPI-based health monitoring system is proposed. |
| type | Article - Journal |
| type.DCMIType | text |
| type.status | Final version |
| rights | This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. |
| rights.URI | |
| relation.isPartOf | Optical Engineering |
| date.accessioned | 2007-04-11T17:00:48Z |
| date.available | 2008-03-20T16:07:26Z |
| identifier.persist.URI |