Submissions from 2005
Structure, Magnetic, and Transport Properties of Ti-substituted La₀.₇Sr₀.₃MnO₃, M. S. Kim, Jinbo Yang, Qingsheng Cai, X.-D. Zhou, William Joseph James, William B. Yelon, D. Buddhikot, Satish K. Malik, and Paul Ernest Parris
The Effect of Cu-Doping on the Magnetic and Transport Properties of La₀.₇Sr₀.₃MnO₃, M. S. Kim, Jinbo Yang, Qingsheng Cai, X.-D. Zhou, William B. Yelon, Paul Ernest Parris, and William Joseph James
The Wettability of Titanium Diboride by Molten Aluminum Drops, W. J. Krafick, P. D. Ownby, G. Ackart, and D. A. Weirauch Jr.
Research on a Hybrid Manufacturing Process for Aerospace Structures, Frank W. Liou, Kevin P. Slattery, J. Choi, Hsin-Nan Chou, Mary Kinsella, Joseph William Newkirk, and K. Young
Synthesis and Characterization of Aluminum-polyaniline Thin Films and Membranes, Yan Liu, Matthew O'Keefe, Ayse Beyaz, and Thomas P. Schuman
The Forge Welded Iron Cannon Near Fateh Burj of Golconda Fort Rampart, Surender Maddela, J. Shankar, and R. Balasubramaniam
Stem Cell-based Composite Tissue Constructs for Regenerative Medicine, Jeremy J. Mao and M. N. Rahaman
Borate Glass Supports the in Vitro Osteogenic Differentiation of Human Mesenchymal Cells, Nicholas W. Marion, Wen Liang, Gwendolen C. Reilly, D. E. Day, M. N. Rahaman, and Jeremy J. Mao
Borate Glass Supports the In Vitro Osteogenic Differentiation of Human Mesenchymal Stem Cells, Nicholas W. Marion, Wen Liang, Gwendolen C. Reilly, D. E. Day, M. N. Rahaman, and Jeremy J. Mao
Development of Ultrafine-grained Microstructure and Low Temperature (0.48 Tm) Superplasticity in Friction Stir Processed Al-Mg-Zr, Z. Y. Ma and Rajiv S. Mishra
Investigation of Wire Electrical Discharge Machining of Thin Cross-sections and Compliant Mechanisms, F. Scott Miller, Chen-Chun Kao, Albert Shih, and Jun Qu
Integral Channels in Metal Components and Fabrication Thereof, Rajiv S. Mishra
Creep Behavior of Extruded Al-6Mg-1Sc-1Zr-10 Vol.% SiCp Composite, Rajiv S. Mishra, S. P. Deshmukh, and K. L. Kendig
Laminated Metal Composites—high Temperature Deformation Behavior, Rajiv S. Mishra, R. B. Grishaber, A. V. Sergueeva, and A. K. Mukherjee
Friction Stir Welding and Processing, Rajiv S. Mishra and Z. Y. Ma
Embedding a Wrought Microstructure in a Cast Component: A Novel Application of Friction Stir Processing, Rajiv S. Mishra, M. R. Sharma, and Murray W. Mahoney
Studies of Lead-iron-phosphate Glasses by Raman, Mössbauer and Impedance Spectroscopy, Andrea Moguš-Milanković, Signo Tadeu Dos Reis, A. Šantić, D. E. Day, and Kresimir Furic
Dielectric Behavior and Impedance Spectroscopy of Bismuth Iron Phosphate Glasses, Andrea Moguš-Milanković, A. Šantić, V. Licina, and D. E. Day
Friction Stir Microforming of Superplastic Alloys, Saurav Mohan and Rajiv S. Mishra
Effects of Processing on Sinter Hardened Steel Parts, Joseph William Newkirk, G. B. Fillari, Sanjay N. Thakur, T. F. Murphy, and K. S. Narasimhan
Local Modification of P/M Parts to Fully Densify and Enhance Properties, Joseph William Newkirk, Anand Jambunathan, Julie Ply, and Rajiv S. Mishra
Quantitative Phase Analysis of Reactive Wetting of Mullite by Silicate Glasses, P. D. Ownby, W. Braue, B. Hildmann, and Benjamin T. Eldred
Fourier Transform Infrared Analysis of Hydroxyl Content of Hydrothermally Processed Heteroepitaxial Barium Titanate Films, Sandeep K. Patil, Nipun Shah, Frank D. Blum, and M. N. Rahaman
Challenges Facing the Steel Industry in Attracting and Training Engineers, Kent D. Peaslee
Materials Education at the University of Missouri-Rolla: Educating Metallurgical and Ceramic Engineers, Kent D. Peaslee
Efficiency in Steel Melting: Opportunities and Progress, Kent D. Peaslee, Semen Naumovich Lekakh, Von Richards, and Jay Triplett
Efficiency in Steel Melting: Ladle Development, Kent D. Peaslee, Semen Naumovich Lekakh, Todd P. Sander, and Jeffrey D. Smith
Alloy Recovery and Control in Steel Melting, Kent D. Peaslee, Darryl S. Webber, Semen Naumovich Lekakh, and Bradley Randall
Experimental Study of Kinetic Processes during the Steel Treatment at Two LMF's, Jorg Annie Peter, Kent D. Peaslee, D. G. C. Robertson, and Brian G. Thomas
Introduction of a Novel, Scrap-Based, Fully Continuous Steelmaking Process, Jorg Annie Peter, Kent D. Peaslee, D. G. C. Robertson, Lifeng Zhang, and Brian G. Thomas
Influence of the Grain Boundaries on Conductivity of Yttrium Stabilized Zirconia, Vladimir Petrovsky, Piotr Z. Jasinski, Tatiana Petrovsky, and Harlan U. Anderson
Low-temperature Processed Anode for Solid Oxide Fuel Cells, Vladimir Petrovsky, Toshio Suzuki, Piotr Z. Jasinski, and Harlan U. Anderson
Utilizing NDE Methods for Steel Casting Performance, David Poweleit, Raymond Monroe, and Von Richards
Preparation and Bioactive Characteristics of Porous Borate Glass Substrates, M. N. Rahaman, Wen Liang, D. E. Day, Nicholas W. Marion, Gwendolen C. Reilly, and Jeremy J. Mao
Preparation and Bioacttve Characteristics of Porous Borate Glass Substrates, M. N. Rahaman, Wen Liang, D. E. Day, Nicholas W. Marion, Gwendolen C. Reilly, and Jeremy J. Mao
A New DTA Method for Measuring Critical Cooling Rate for Glass Formation, C. S. Ray, Signo Tadeu Dos Reis, Richard K. Brow, Wolfram Höland, and Volker M. Rheinberger
Thermodynamics of Refractories for Black Liquor Gasification, Alireza Rezaie, William L. Headrick, and William Fahrenholtz
The Effects of MIM Processing Parameters on Variations in Part Weights and Dimensions, James Alan Sago and Joseph William Newkirk
Direct, Controlled Synthesis of the Nonimmunogenic Hydrophilic Polymer, Poly(N-(2-Hydroxypropyl)methacrylamide) Via RAFT in Aqueous Media, Charles W. Scales, Yulia A. Vasilieva, Anthony J. Convertine, Andrew B. Lowe, and Charles L. McCormick
Modeling of Field Distribution and Energy Storage in Diphasic Dielectrics, Robert W. Schwartz and Sandeep K. Patil
Glassmaking: Adding Value, Improving Quality, T. P. Seward III, Carlo G. Pantano, and Richard K. Brow
Elevated Temperature Deformation Behavior of Nanostructured Al-Ni-Gd-Fe Alloys, X. L. Shi, Rajiv S. Mishra, and T. J. Watson
Phase Equilibria Diagrams of One Component, Jeffrey D. Smith
Lime-Based Plasma Spray Coatings on Steelmaking Nozzles, Jeffrey D. Smith, Kent D. Peaslee, and David C. Van Aken
The Optical Properties and Band Gap Energy of Nanocrystalline La₀.₄Sr₀.₆TiO₃ Thin Films, Toshio Suzuki, Piotr Z. Jasinski, Vladimir Petrovsky, and Harlan U. Anderson
Performance of a Porous Electrolyte in Single-Chamber SOFCs, Toshio Suzuki, Piotr Z. Jasinski, Vladimir Petrovsky, Fatih Dogan, and Harlan U. Anderson
Interaction of Alumina Inclusions in Steel with Calcium-Containing Materials, Robert B. Tuttle, Jeffrey D. Smith, and Kent D. Peaslee
Method and Sealant for Weld Joints, David C. Van Aken, John A. Baumann, Richard J. Lederich, and Rajesh Talwar
Growth of II-IV-V₂ Chalcopyrite Nitrides by Molecular Beam Epitaxy, J. E. Van Nostrand, J. D. Albrecht, R. Cortez, K. D. Leedy, Benedict Y. Johnson, and Matthew O'Keefe
High-Temperature Monitoring of Refractory Wall Recession Using Frequency-modulated Continuous-wave (FM-CW) Radar Techniques, Bivin Varghese, C. DeConick, G. Cartee, M. Velez, Robert E. Moore, and R. Zoughi
Nickel Dissolution in Argon Stirred Steel, Darryl S. Webber, Kent D. Peaslee, and Von Richards
Foundry Size Ladle Metallurgy Vessel: Ferromanganese Dissolution, Darryl S. Webber, Von Richards, and Kent D. Peaslee
An EXAFS Investigation of Rare-Earth Local Environment in Ultraphosphate Glasses, Andrew K. Wittenauer, Richard K. Brow, Mevlüt Karabulut, Ezz Metwalli, G. K. Marasinghe, C. H. Booth, J. J. Bucher, and D. K. Shuh
Numerical and Experimental Analysis for Laser Surface Densification of Plasma Sprayed Coatings, J. Wu, J. Choi, Shi C. Zhang, and Greg Hilmas
Study of the Electronic Structure of CaFeO₃, Jinbo Yang, M. S. Kim, Qingsheng Cai, X.-D. Zhou, Harlan U. Anderson, William Joseph James, and William B. Yelon
Magnetic and Transport Properties of Nanocomposite Fe/Fe₃₋δO₄ and Fe₃₋δO₄ Films Prepared by Plasma-enhanced Chemical Vapour Deposition, Jinbo Yang, Satish K. Malik, X.-D. Zhou, M. S. Kim, William B. Yelon, Harlan U. Anderson, and William Joseph James
Designing a New Scrap-Based Continuous Steelmaking Process using CFD Simulation, Lifeng Zhang, Jun Aoki, Brian G. Thomas, Jörg Peter, and Kent D. Peaslee
Comparative Study on Fatigue Properties of Friction Stir and MIG-Pulse Welded Joints in 5083 Al-Mg Alloy, Caizhi Zhou, Xinqi Yang, and Guohong Luan
Fatigue Properties of Friction Stir Welds in Al 5083 Alloy, Caizhi Zhou, Xinqi Yang, and Guohong Luan
Coupled Electrical and Magnetic Properties in (La,Sr)FeO3-δ, X.-D. Zhou, Qingsheng Cai, Jinbo Yang, M. S. Kim, William B. Yelon, William Joseph James, Y.-W. Shin, B. J. Scarfino, and Harlan U. Anderson
Electrical and Structural Properties of La(Fe,M)O₃ (M = Mn, Ni, Cu), X.-D. Zhou, Qingsheng Cai, Jinbo Yang, B. J. Scarfino, Y. Shin, William Joseph James, William B. Yelon, Harlan U. Anderson, and L. R. Pederson
Size Effect on the Electronic Properties of Doped and Undoped Ceria, X.-D. Zhou, Wayne Huebner, and Harlan U. Anderson
Corrosion Behavior of Inconel 690 & 693 in an Iron Phosphate Melt, Dongmei Zhu, Cheol-Woon Kim, and D. E. Day
Phase and Homogenization of Lead Borate Glasses under Low, Normal or High Gravity, Dongmei Zhu, Fa Luo, Wancheng Zhou, C. S. Ray, and D. E. Day
Submissions from 2004
The Effect of the Physical and Chemical Nature of Titanium Diboride on its Wettability by Aluminum, G. Ackart, P. D. Ownby, W. J. Krafick, and D. A. Weirauch Jr.
Iron - Phosphate Glass (IPG) Waste Forms Produced Using Induction Melter with Cold Crucible, Albert S. Aloy, Roman A. Soshnikov, Alexander V. Trofimenko, D. Gombert, D. E. Day, and Cheol-Woon Kim
Processing and Characterization of Yttrium-stabilized Zirconia Thin Films on Polyimide from Aqueous Polymeric Precursors, Harlan U. Anderson and Brian P. Gorman
High Gradient Multilayer Insulator Technology, Harlan U. Anderson, Stephen E. Sampayan, G. J. Caporaso, W. C. Nunnally, D. M. Sanders, J. A. Watson, and Mike L. Krogh
Defect Chemistry of Mixed Ionic/electronic P-type Oxides, Harlan U. Anderson, X.-D. Zhou, and Fatih Dogan
Experimental and Theoretical Investigation of Mixing in a Bottom Gas-Stirred Ladle, Jun Aoki, Brian G. Thomas, Jörg Peter, and Kent D. Peaslee
Experimental Study of Abrasive Waterjet Nozzle Candidate Materials, Jinhua Bao, Sanhong Zhang, T. Huang, Joseph William Newkirk, Greg Hilmas, and David A. Summers
Wear-Resistant WC Composite Hard Coatings by Brazing, Ju Bao, Joseph William Newkirk, and Sarina Bao
Electrode Support Structures for Planar Solid Oxide Fuel Cells, Dustin Beeaff and Greg Hilmas
Interfacial Reactions between Lithium Silicate Glass-ceramics and Ni-based Superalloys and the Effect of Heat Treatment at Elevated Temperatures, Murat Bengisu, Richard K. Brow, and J. E. White
Reactive Joining of Alumina by Oxidation of Al Interlayers, Murat Bengisu and William Fahrenholtz
Dielectric Properties and Structural Features of Barium-iron Phosphate Glasses, P. Bergo, Signo Tadeu Dos Reis, W. M. Pontuschka, J. M. Prison, and C. C. Motta
Use of Stress to Produce Highly Oriented Tetragonal Lead Zirconate Titanate (PZT 40/60) Thin Films and Resulting Electrical Properties, Geoffrey L. Brennecka, Wayne Huebner, Bruce A. Tuttle, and Paul G. Clem
In Vivo Analysis of Bioactivity of Borate Glass, Roger F. Brown, Nora L. Adams, Richard K. Brow, and Beau Ahrens
SOFC Seals Research at University of Missouri, Richard K. Brow
Characterization of Zirconium Diboride-Molybdenum Disilicide Ceramics, Adam L. Chamberlain, William Fahrenholtz, Greg Hilmas, and Donald T. Ellerby
High Strength ZrB₂-based Ceramics, Adam L. Chamberlain, William Fahrenholtz, Greg Hilmas, and Donald T. Ellerby
High Strain Rate Superplasticity in Aluminum Alloys via Friction Stir Processing, Indrajit Charit, Z. Y. Ma, and Rajiv S. Mishra
Evaluation of Microstructure and Superplasticity in Friction Stir Processed 5083 Al Alloy, Indrajit Charit and Rajiv S. Mishra
Ultrafine Grained Aluminum Alloys via Friction Stir Processing, Indrajit Charit and Rajiv S. Mishra
Annealing-Induced Full Amorphization in a Multicomponent Metallic Film, J. P. Chu, C. T. Liu, T. Mahalingam, S. F. Wang, Matthew O'Keefe, Benedict Y. Johnson, and C. H. Kuo
Facile, Contolled, Room-Temperature RAFT Polymerization of N-Isopropylacrylamide, Anthony J. Convertine, Neil Ayres, Charles W. Scales, Andrew B. Lowe, and Charles L. McCormick
A Biodegradable Radiation Delivery System Utilizing Glass Microspheres & EDTA Chelation Therapy, Samuel D. Conzone, Mathew M. Hall, D. E. Day, and Roger F. Brown
Bioactive Materials, D. E. Day, Erik M. Erbe, Marina Richard, and Joshua A. Wojcik
Creep Behavior and Threshold Stress of an Extruded Al-6Mg-2Sc-1Zr Alloy, S. P. Deshmukh, Rajiv S. Mishra, and K. L. Kendig
The Center for Dielectric Studies (CDS): A National Science Foundation Industry/university Cooperative Research Center, Fatih Dogan, C. A. Randall, M. Lanagan, A. Schwarzkopf, and Harlan U. Anderson
Neodymium Fluorescence Quenching by Hydroxyl Groups in Phosphate Laser Glasses, P. R. Ehrmann, K. Carlson, J. H. Campbell, Carol A. Click, and Richard K. Brow
Evaluation of Aluminum Alloy Heat Treatment using Fractography, J. L. Evans, S. A. Batzer, Donald Scott MacKenzie, and Joseph William Newkirk
Processing and Characterization of ZrB₂-based Monolithic and Fibrous Monolithic Ceramics, William Fahrenholtz, Greg Hilmas, Adam L. Chamberlain, and James W. Zimmermann
Effects of Solvent Mixtures on Dispersion of Lanthanum-modified Lead Zirconate Titanate Tape Casting Slurries, Jian-Huei Feng and Fatih Dogan
Crystallization of Li₂O-2SiO₂ Glass under High Hydrostatic Pressures, Tihana Fuss, C. S. Ray, C. E. Lesher, and D. E. Day
Abrasive Waterjet Cutting through 40 mm Munitions Casing, Greg Galecki, David A. Summers, Joseph William Newkirk, Robert D. Fossey, and M. Johnson
Thermal Processing Optimization for Simulated Hanford Waste Glass (AZ 101), Adriana Giordana; William G. Ramsey; T. F. Meaker; B. Kauffman; M. McCarthy; K. Guilbeau; Jeffrey D. Smith; F. Scott Miller; Thomas Sanders; Eric W. Bohannan; and For full list of authors, see publisher's website.
Microstructure Development in Unsupported Thin Films, Brian P. Gorman and Harlan U. Anderson
Synthesis and Microstructural Characterization of Unsupported Nanocrystalline Zirconia Thin Films, Brian P. Gorman and Harlan U. Anderson
Characterization of Zirconium Diboride for Thermal Protection Systems, Greg Hilmas, William Fahrenholtz, Adam L. Chamberlain, and Donald T. Ellerby
