Mechanical Relaxation Anomalies in Mixed Alkali Oxides
Mechanical relaxation (MR) processes were investigated in single and mixed alkali (MA) metaphosphate glasses using a dynamic mechanical analyzer (DMA) over a range of frequencies, 0.1-50 Hz, and temperatures, 24-250°C. The mechanical loss modulus, M″, of each mixed, sodium and lithium, alkali glass exhibited two characteristic maxima, a large maximum just below Tg, and a well developed, yet considerably diminished in amplitude, maximum at a much lower temperature. The single alkali analogs, on the other hand, exhibited only a single maximum and this maximum appeared in the same location as the lower temperature peak observed in the MA glasses. The location of these maxima are identified with dynamic processes within the glass which occur with average frequencies, νμ(Na, Li), for the high T maximum in the mixed glasses, and νμ (Li) and νμ (Na) for the lithium and sodium glasses, respectively. These frequencies νμ(Na, Li), νμ (Li) and νμ (Na), varied exponentially with 1/T; νμ (Na, Li) had the largest activation energy. In addition νμ(Na, Li) ≪ νμ(Na) < νμ(Li) for T < Tg. Two other important observations were made, the high temperature maximum in M″ reached its largest amplitude when the mole fractions of Na2O and Li2O were comparable and νμ (Na, Li) exhibited a maximum in the same composition range. Our observations are discussed in light of a local site-memory relaxation model based on the notion that below Tg, cation hopping dynamics are intimately coupled with local glass network relaxations. © 1998 Elsevier Science B.V. All rights reserved.
P. F. Green et al., "Mechanical Relaxation Anomalies in Mixed Alkali Oxides," Journal of Non-Crystalline Solids, Elsevier, Jan 1998.
Materials Science and Engineering
Article - Journal
© 1998 Elsevier, All rights reserved.
This document is currently not available here.