Masters Theses
This collection contains theses written in partial fulfillment of the master's degree, from 1900 to the present.
The first masters degree was awarded in Chemistry, to V. H. Gottschalk; his thesis was titled The Determination of Aluminium. Most recently, popular masters disciplines have included Environmental Engineering, Electrical Engineering, Geological Engineering, Petroleum Engineering and Nuclear Engineering.Theses and dissertations previously submitted in print will be digitized with permission of the author or copyright holder. Missouri S&T Library and Learning Resources encourages graduates to provide this permission so that their work can reach the widest possible audience. If you would like to grant this permission, please use this Form or go to your thesis in Scholars' Mine and click on the Share My Thesis button. Theses and dissertations will be digitized as time allows and will not become immediately accessible.
More information on today’s graduate degree programs is available on the Missouri S&T website.
To browse dissertations by academic department, please visit our Browse Collections page.
Theses from 1958
Effect of hydrated lime and portland cement on the physical properties of clay soil for highway base construction, Judson Leong
Frost formation and its influence upon heat transfer, Jack Lewis Loper
An improved long sensitive time Wilson cloud chamber, Clarence W. Mettenburg
Operational characteristics of a small sewage oxidation lagoon, Karlheinz C. Muhlbauer
Surface temperature measurement of metal undergoing induction heating, Ding-Yee Nee
Effect of concrete shrinkage on stresses in reinforcing steel, C. Raymond Nowacki
The development of a device to replace the oil well dynamometer, Jerry Bernard Overton
Rheological measurement of a starch suspension as a dilatant fluid, Earl Edward Pape
Permeability study of algal reef beds within the Bonneterre formation, National Mine, St. Francois, Missouri, Bobbie L. Perry
Design of distillation solvent recovery system, Donald Empson Puyear
A study of background in a long sensitive time Wilson cloud chamber, Donald A. Rinker
An application of cathodic sputtering to the etching of metallographic specimens, Robert Ruch
Performance characteristics of a tubular regenerative heat exchanger, Harry J. Sauer Jr.
Analysis of mining mechanization in the fluorspar mine, Southern Illinois, Marangin Simatupang
Paragenesis of the minerals in the Einstein vein Madison County, Missouri, Robert P. Stevens
The use of chelating agents in inorganic analysis, Richard K. Vitek
Performance parameters of low-density ammonium nitrate base explosives; experimental results and J. Taylor's method, Mohammad Azhari Warga-Dalem
Liesegang rings, Robert Edward Young
Detection of buried basement highs by airphoto drainage pattern analysis, Reynolds and Wayne counties, Missouri, Papken Aram Zarzavatjian
Theses from 1957
Creep characteristics of thin prestressed concrete slabs, Wayne F. Alch
The magnitude and directions of strains and stresses in edge loaded concrete slabs, William M. Baldwin
The Phosphoria formation of the northeastern Big Horn Basin, Wyoming, William A. Beatty
Investigation of length changes in prestressed concrete slabs with outside exposures, John Best
Separation of iron-tin alloys using gas-solid reactions, Carl Richard Bieling
A geological study of the Irvine Ranch Area, Johnson and Campbell counties, Wyoming, Gale E. Butterfield
Servomechanism compensation with an active phase-lead network, Robert T. DeWoody
Internal friction in manganese copper alloys, William Paul Dixon
Physical properties of concrete at early ages, Karl H. Dunn
A simplified mathematical method for petroleum property evaluation, Charles G. Edwards
Determination of lattice constants, and thermal expansion coefficients of Ti₂O₃ and of its solid solutions with Ti, Tatsuhiko Ejima
Detection of low energy positive ions by scintillation methods, Graydon J. Hanson
Influence of some metals on the rate of corrosion and deposition of titanium in molten salt baths, Yu-Pu Huang
A comparative determination of weld shearing values in welded wire reinforcement fabric, Ernest Charles Kobs
Development of rating curves for concrete rebound hammer on concrete specimens from local aggregates, Rolla Smith Lush
Filter materials for emergency use in diatomite type water filters, Robert Wassell McLeane
Temperature stabilized transistor direct current amplifier, William Lewis Metcalf Jr.
The stability of rectangular plates with built-in supports at the edges, John Bruce Miles
Some thermodynamic and structural properties of a linear chain of atoms, and extension of the model to two- and three-dimensional cases, Hari Gopal Mukerjee
An investigation of the dissolution of hafnium-free zirconium in hydrofluoric acid and the effect of fluoride additions, Alfred S. Neiman
A determination of the sonic modulus of early age concrete, William Dale Nelson
Statistical analysis of X-40 (Stellite-31) production blends., Edward P. Patterson
The correlation of Kelly Ball penetration readings with standard slump cone readings for concrete made from Missouri aggregates, James Claude Rives
Investigation of plastic deformation in prestressed concrete slabs from long time loading, Joe B. Roberts
A probe for measuring ultrasonic pressures, Robert F. Rohrer
Transference numbers of concentrated manganous chloride solutions, Marshall L. Severson
Investigation of length changes and warping in thin prestressed pavements, Wilbur D. Stites
Physical properties of concrete at early ages, Curtis E. Weddle Jr.
Theses from 1956
The effect of pH on phase reversals of protein-stabilized emulsions, Samuel Arthur Bradford
Geothermometry at the Balmat No. 2 mine, New York by the FeS-ZnS system, Bruce R. Doe
Investigation of the current distribution on an antenna in a waveguide, David J. Freeman
Pre-Cambrian geology of Washington County area, Missouri, Gordon Blair French
A study of the deleading of zinc sulfide concentrates, Larry Leroy Gidley
Physical properties of concrete at early ages, Peter G. Hansen
Correlation of weir crest depth, Froude number, H/P ratio, weir thickness, Paul Harrawood
Heat transfer coefficient of paint films, Richard F. Justus
Geology of the northwest quarter of the Washington Quadrangle, Missouri, James Anthony Martin
The thermal conductivity of potassium chloride at elevated temperatures, Wendell D. Miller
Thermal conductivity of sodium chloride within the temperature range 375°K to 637°K, Paul E. Ohlsen
A study of the production of thorium nitrate, K. P. Chona Panikkar
Promotion of dropwise condensation by silicones, Charles Orlando Reed Jr.
Direct correlation functions for liquid argon, Arthur Reetz Jr.
An investigation of the internal friction of manganese-copper alloys, Ed. (Edward) Sickafus
Determination of the effect of air-entraining agents on certain physical properties of concrete at early ages, James Arthur Spilman
The effect of metallic naphthenates on the oxidation of linoleic acid, David Elliott Troutner
Development of large hole burn cut drift rounds, Joseph J. Yancik Jr.
Theses from 1955
The thermal conductivity of sodium chloride at elevated temperatures, Howard Martin Brown
A study of tunnel demolition by hasty methods, Richard Lee Bullock
A study of titanium diffusion coatings by x-ray fluorescent methods, Alan Bernard Burgess
A study of the structure of titanium diffusion coatings on iron and steel, Pao-Jen Chao
Morphology and systematic position of some Anomalinid foraminifera, Billy G. Deaver
Addition of ketene to ethylene oxide, John Philip Friedrich
Separation of germanium, lead, zinc, and cadmium by anion exchange, Franklin Maynard Hill
Deposition of titanium by gaseous reaction, Louis John Reitsma Jr.
Further studies of vapor-liquid equilibria of methanol-ethylene glycol-water, Herbert Benjamin Sachs
The preparation of titanium tetrachloride from rutile, Nalin Sen
Mechanical vibration of vacuum tubes, Jerry Dale Swearingen
Correlation functions for use in small angle x-ray scattering, James Edwin Thomas Jr.
Theses from 1954
Effect of carbon content in steels upon the deposition of titanium from a fused salt bath, Reinhard Paul Abendroth
A study of the emission and absorption spectra of NaCl and KCl between 100 A and 1000 A, Paul Henry Blackmon
The velocity of ultrasonics in liquids, Mack A. Breazeale
Corrosion products of titanium in fused salt baths, Kai-Chai Chiou
Foraminifera of the type section of the Archusa marl of Mississippi (Eocene, Claiborne group, Wautubbee formation), Nathan Eugene Crockett
The closure of thin wall pressure vessels, Archie W. Culp Jr.
Tunnel rehabilitation, Jay C. Dotson
Mechanism and measurement of first stage graphitization in white cast iron, David S. Gould
A fundamental study of clay drying using ware of large cross section, Robert F. Grady III
Horizontal pressures on retaining walls due to line surface loads, John B. Heagler
A model for x-ray scattering from a free-volume liquid, Charles A. Hewett
Investigation of soil bricks as a building material, Ahmet Ilter
Deposition of metallic coatings from fused salt baths, Andrew Hessler Larson
The use of a steady state flow reactor in the study of rapid gas phase reactions, Ormond Kennedy Lay
Coloration of glass by high energy radiation, Thomas L. Nickens
Heat flow in a two-dimensional steady-flow system without radial symmetry, George H. Parharoglu
Testing of Missouri shales for light weight aggregate production, Jerry D. Plunkett
An investigation of continuous steel beams in the plastic range, Robert Adams Shoolbred
The mineralogy of the Grassy Creek and Saverton formations, Dirk Pieter Van Duym
The design and construction of an electronic D-C analog computer, Frederick R. Wagner and William A. Paar
Determination of the thermal conductivity of sodium chloride at elevated temperatures, Harold Robert Weisbrod
Geology of the south half of the Meramec Spring Quadrangle, Missouri, Howard Joseph Yorston
Theses from 1953
A.C. circuit interruption, Palmer L. Anthony Jr.