"This paper presents the design and construction of a medium power, synchronous, electronic switch and associated timing and control circuits.
The unit described is capable of controlling a 20 ampere resistive or inductive load from a 110/220 volt, 60 Hz excitation source. Thyristors are used as the active switching elements. The period of the on/off switching cycle may be varied from 1/60 second to 8 1/2 seconds. Turn-on and turn-off may occur at independently selected phase angles relative to the reference frequency source.
Higher power operation could be obtained easily with minor design changes"--Abstract, page ii.
McPherson, George, 1921-2017
Tracey, James H.
Kerr, Richard H., 1907-1980
Zenor, Hughes M., 1908-2001
Electrical and Computer Engineering
M.S. in Electrical Engineering
University of Missouri at Rolla
vi, 61 pages
© 1965 Floyd S. Hall, All rights reserved.
Thesis - Open Access
Library of Congress Subject Headings
Electric switchgear -- Design and construction
Print OCLC #
Electronic OCLC #
Link to Catalog Recordhttp://laurel.lso.missouri.edu/record=b1068622~S5
Hall, Floyd S., "The design and construction of a medium power, synchronous, electronic switch" (1965). Masters Theses. 5714.