"The purpose of this work was to design and construct a facility to calibrate accelerometers. A ceramic piezoelectric shaker and modified Michelson interferometer together with necessary electronic equipment were used. The system produced accurate and stable acceleration at five discrete points from 1,000 to 5,000 cycles per second. the maximum calibration levels were approximately 50 g's"--Abstract, page ii.
Rhea, L. G.
Francis, Lyman L., 1920-2004
Kern, Frank J.
Mechanical and Aerospace Engineering
M.S. in Mechanical Engineering
University of Missouri at Rolla
vi, 35 pages
© 1965 Richard Rabenau, All rights reserved.
Thesis - Open Access
Library of Congress Subject Headings
Accelerometers -- Calibration
Accelerometers -- Design and construction
Print OCLC #
Electronic OCLC #
Link to Catalog Recordhttp://laurel.lso.missouri.edu/record=b1068672~S5
Rabenau, Richard, "The design and construction of an instrument for calibrating accelerometers" (1965). Masters Theses. 5247.