Response and Modeling of Cantilever Retaining Walls Subjected to Seismic Motions
A series of nonlinear, explicit finite difference analyses were performed to determine the dynamic response of a cantilever retaining wall subjected to earthquake motions. This article outlines the calibration and validation of the numerical model used in the analyses and comparisons are presented between the results from the finite difference analyses and results from simplified techniques for computing dynamic earth pressures and permanent wall displacement (i.e., Mononobe-Okabe and Newmark sliding block methods). It was found that at very low levels of acceleration, the induced pressures were in general agreement with those predicted by the Mononobe-Okabe method. However, as the accelerations increased to those expected in regions of moderate seismicity, the induced pressures are larger than those predicted by the Mononobe-Okabe method. This deviation is attributed to the flexibility of the retaining wall system and to the observation that the driving soil wedge does not respond monolithically, but rather responds as several wedges. Additionally, it was found that the critical load case for the structural design of the wall differed from that for the global stability of the wall, contrary to the common assumption made in practice that the two load cases are the same.
R. A. Green et al., "Response and Modeling of Cantilever Retaining Walls Subjected to Seismic Motions," Computer-Aided Civil and Infrastructure Engineering, vol. 23, no. 4, pp. 309-322, John Wiley & Sons, May 2008.
The definitive version is available at https://doi.org/10.1111/j.1467-8667.2007.00538.x
Geosciences and Geological and Petroleum Engineering
Keywords and Phrases
Acceleration; Cantilever Beams; Earthquakes; Finite Difference Method; Mathematical Models; Seismic Response, Cantelever Retaining Walls; Dynamic Earth Pressure, Retaining Walls, Acceleration; Cantilever Beams; Earthquakes; Finite Difference Method; Mathematical Models; Retaining Walls; Seismic Response, Acceleration; Conference Proceeding; Displacement; Dynamic Response; Finite Difference Method; Ground Motion; Induced Seismicity; Modeling; Nonlinearity; Numerical Model; Retaining Wall; Strong Motion; Structural Response
International Standard Serial Number (ISSN)
Article - Journal
© 2008 Computer-Aided Civil and Infrastructure Engineering, All rights reserved.