Drilling Simulation vs. Actual Performance in Western Canada
During the past two years a drilling performance simulator has been applied in a pre-drill mode to more then 50 wells with an average depth of 3000 meters in Western Canada. The main goal of applying the simulator was to optimize the drilling performance by increasing rate of penetration (ROP) and decreasing drilling time and costs. To maximize performance the correct bits, hydraulics, operating parameters and pull depths were selected in advance. The drilling simulator uses offset well drilling data and records to generate the apparent rock strength which is then correlated to the formations depths for the new well to be drilled. Multiple combinations of drill bits and operating parameters are simulated to obtain the optimum drilling solution for the next well. The results indicate very good match between predicted and actual field results for ROPs as well as total drilling times and well costs. The simulation approach initially easily matched pacesetter performance of previously drilled wells in the mature field and then by further applying the simulator new pacesetters where set improving performance overall with more then 15 percent. The presimulated optimized results were sent to the field and during the drilling of the well the field data was overlaid with the presimulated field data to compare progress. During the drilling follow-up the bit wear and apparent rock strength calculated from the field data were compared to the presimulated to evaluate the current status of the bit and drilling progress. The follow-up process gave room to take immediate actions and a baseline for communication with the field and office during daily meetings. This paper presents the commercially available simulator and multiple cases which compares the pre-simulated to the actual performance. The results clearly indicate the large potential for the use of such a simulator in drilling operations.
G. Hareland et al., "Drilling Simulation vs. Actual Performance in Western Canada," Proceedings of the Society of Petroleum Engineers Rocky Mountain Oil and Gas Technology Symposium (2007, Denver, CO), pp. 64-69, Society of Petroleum Engineers (SPE), Apr 2007.
Society of Petroleum Engineers Rocky Mountain Oil and Gas Technology Symposium (2007: Apr. 16-18, Denver, CO)
Geosciences and Geological and Petroleum Engineering
Keywords and Phrases
Drilling simulator; Rate of penetration (ROP); Bits; Computer simulation; Rock mechanics; Well drilling
International Standard Book Number (ISBN)
Article - Conference proceedings
© 2007 Society of Petroleum Engineers (SPE), All rights reserved.