Simulation of ESD Coupling into Cables Based on ISO 10605 Standard using Method of Moments
ESD events can damage or upset electronic vehicle systems, so discharges to the electronic systems or to the attached cables need to be considered. Discharges to the cables or to coupling structures close to the cables were investigated and a Method of Moments (MoM)-based methodology for ESD simulation is proposed. The simulation results for test benches according to ISO standards were verified against measurements.
I. Oganezova et al., "Simulation of ESD Coupling into Cables Based on ISO 10605 Standard using Method of Moments," Proceedings of the 2016 IEEE International Symposium on Electromagnetic Compatibility (2016, Ottawa, Canada), vol. 2016-September, pp. 701-706, Institute of Electrical and Electronics Engineers (IEEE), Sep 2016.
The definitive version is available at http://dx.doi.org/10.1109/ISEMC.2016.7571734
2016 IEEE International Symposium on Electromagnetic Compatibility (2016: Jul. 25-29, Ottawa, Canada)
Electrical and Computer Engineering
Keywords and Phrases
Automobile electronic equipment; Cables; Electric discharges; Electrostatic devices; Electrostatic discharge; Method of moments; Air discharge; Coupling structures; Electronic systems; Electronic vehicles; ESD gun; ISO 10605; ISO standards; Method of moments (MOM); Electromagnetic compatibility
International Standard Book Number (ISBN)
International Standard Serial Number (ISSN)
Article - Conference proceedings
© 2016 Institute of Electrical and Electronics Engineers (IEEE), All rights reserved.