PLLA-Nanodiamond Composites and Their Application in Bone Tissue Engineering
Nanodiamond (ND) is an attractive nanomaterial for reinforcement of polymers  due to the ND’s superior mechanical and chemical properties, and low biotoxicity. A novel composite material has been produced for bone scaffolds utilizing the biodegradable polymer, poly(L-lactic acid) (PLLA), and octadecylamine-functionalized nanodiamond (ND-ODA) . Composites were prepared by admixing to a PLLA/chloroform solution chloroform suspensions of ND-ODA at concentrations of 0, 1, 3, 5, 7, and 10 (w/w). Dispersion of ND-ODA in the composites was studied by transmission electron microscopy (TEM). The lower-resolution TEM micrograph of 1% wt ND-ODA/PLLA film (Fig. 1a) shows nanodiamond particles dispersed in PLLA film on amorphous carbon support. Due to long hydrocarbon chains of ODA the ND-ODA particles have good wettability with the PLLA so there is no segregation of ND-ODA and PLLA, and the polymer completely surrounds the particles. The high-resolution TEM image (Fig. 1b) shows ND crystals with attached organic material that can be ODA or PLLA. Nanoindentation tests show that the mechanical strength of ND-ODA/PLLA composites improves upon addition of ND (Table 1). Even at low concentrations (1% wt) the ND-ODA increased the hardness of the composite by 60% and Young’s modulus by 20% over neat PLLA. Based on our preliminary observations, we conclude that further additions of ND-ODA resulted in smaller changes with subsequent saturation in the mechanical properties at ∼7% wt (see Table 1). ND is relatively novel nanomaterial. Establishing its biocompatibility requires further studies, especially for modified ND. We studied the biocompatibility of 5-10nm ND and ND-ODA in experiments with a murine osteoblast cell line (7F2, from ATCC). Incubation of a cultured osteoblasts with 1-100μg/ml of ND or ND-ODA particles for 4 hours did not show much influence on the cell viability (Fig. 2), as inferred from an alamarBlue™ assay. To test the feasibility of ND-ODA/PLLA as a matrix material supporting cell growth, osteoblasts were cultured on the composites for 6 days. The attactment and proliferation of 7F2 cells on the scaffolds were assessed, respectively, by fluorescent nuclear staining with Hoechst 33258 and the alamarBlue™ assay. Our results showed that the addition of ND-ODA had only a negligibly small effect on cell proliferation, which is indicative of good biocompatibility of the composites (Fig. 3). The morphology of 7F2 cells growing on all ND-ODA/PLLA composite scaffolds was assessed by SEM. The data (not shown) confirm that the osteoblasts spread on the scaffolds similar to their spreading on TCP (tissue culture plastic). To summarize, the improved mechanical properties of the PLLA/ND-ODA composites and their good biocompatibility suggest that these materials may be suitable for applications in musculoskeletal tissue engineering.
Q. Zhang et al., "PLLA-Nanodiamond Composites and Their Application in Bone Tissue Engineering," Proceedings of the ASME 1st Global Congress on NanoEngineering for Medicine and Biology 2010, NEMB2010, pp. 241-242, American Society of Mechnical Engineers (ASME), Jan 2010.
1st Global Congress on NanoEngineering for Medicine and Biology: Advancing Health Care through NanoEngineering and Computing, NEMB 2010 (7 February 2010 through 10 February 2010, Houston, TX)
ASME Nanotechnology Institute
International Standard Book Number (ISBN)
Article - Conference proceedings
© 2010 American Society of Mechnical Engineers (ASME), All rights reserved.
This document is currently not available here.