Civil Engineering Study 89-5
FOREWORD This progress report contains the following two parts: Part I: Load and Resistance Factor Design Specification for Cold-Formed Steel Structural Members (pp. i-107). Part II: Commentary on the Load and Resistance Factor Design Specification for Cold-Formed Steel Structural Members (pp. 109-161). The load and resistance factor design specification proposed herein is the revised version of the design recommendations prepared in February 1988 and submitted to American Iron and Steel Institute as Tenth Progress Report. This document was prepared according to the 1986 edition of the AISI Specification for the Design of Cold-Formed Steel Structural Members. The selections of ϕ factors are discussed in the Commentary for various types of structural members and connections. This investigation was sponsored by American Iron and Steel Institute. The technical guidance provided by the AISI Subcommitte on Load and Resistance Factor Design and the AISI Staff is gratefully acknowledged. Members of the AISI Subcommitte are: K. H. Klippstein (Chairman), R. Bjorhovde, D. S. Ellifritt, S. J. Errera, T. V. Galambos, B. Hall, D. H. Hall, R. B. Heagler, N. Iwankiw, A. L. Johnson, D. L. Johnson, A. C. Kuentz, A. S. Nowak, T. B. Pekoz, C. W. Pinkham, R. M. Schuster, and W. W. Yu. Former members of theAISI Task Group on LRFD included R. L. Cary, N. C. Lind, R. B. Matlock, W. Mueller, F. J. Phillips, D. S. Wolford and Late Professor G. Winter. Special thanks are extended to T. V. Galambos, Consultant of the project, T. N. Rang, B. Supornsilaphachai, B. K. Snyder, L. C. Pan, and M.K. Ravindra for their contributions to the project.
Civil, Architectural and Environmental Engineering
Wei-Wen Yu Center for Cold-Formed Steel Structures
American Iron and Steel Institute
Missouri University of Science and Technology
© 1989 Missouri University of Science and Technology, All rights reserved.
Report - Technical
Hsiao, Ling-En; Yu, Wei-wen; and Galambos, Theodore V., "Load and resistance factor design of cold-formed steel load and resistance factor design specification for cold-formed steel structural members with commentary" (1989). Center for Cold-Formed Steel Structures Library. Paper 142.