| Title | Author(s) |
|---|
| Equivalent circuit for transient conduction and convection systems | Abdelnabi, Bassam Sabry Mohammad, 1978-;
|
| 35-45 giga hertz transceiver system for phase and magnitude detection | Aflaki Beni, Aman, 1981-;
|
| Modeling and performance estimation for airborne minefield detection system | Agarwal, Saurabh, 1982-;
|
| Dynamic modeling and simulations of solid oxide fuel cells for grid-tied applications | Akkinapragada, Nagasmitha, 1980-;
|
| Age strengthening of gray cast iron: alloying effects and kinetics study | Anish, Thottathil Viswanathan, 1980-;
|
| Fine particle classification using dilute fluidized beds | Annapoorneswari, Rajasekharan Pillai, 1981-;
|
| Development of a liquid injection propane system for spark-ignited engines via fuel temperature control | Applegate, Brian Charles, 1979-;
|
| Computational study of flow over elliptic airfoils for rotor/wing unmanned aerial vehicle applications | Assel, Timothy William, 1984-;
|
| Design and implementation of a hardened distributed network endpoint security system for improving the security of internet protocol-based networks | Atkins, William Dee, 1982-;
|
| A light-weight middleware framework for fault-tolerant and secure distributed applications | Baird, Ian Jacob, 1980-;
|
| Mechanical properties and microstructure study for direct metal deposition of titanium alloy and tool steel | Bao, Yaxin, 1983-;
|
| Transient performance of closed loop thermosyphons incorporating thermal storage | Benne, Kyle S. (Kyle Stephen), 1983-;
|
| Applications of solar energy to power stand-alone area and street lighting | Bollinger, Joshua David, 1981-;
|
| Vapor phase uptake of volatile organic contaminants by hybrid poplar trees | Breite, Sally Rebecca, 1979-;
|
| A computational theory for the generation of solutions during early conceptual design | Bryant, Cari Rihan, 1977-;
|
| Barriers and best practices for material management in the healthcare sector | Callender, Carlos, 1981-;
|
| Performance improvement of adaptive filters for echo cancellation applications | Challa, Deepak Kumar, 1982-;
|
| The development of hybrid intelligent systems for technical analysis based equivolume charting | Chavarnakul, Thira, 1974-;
|
| Shielding characteristics of a commercial 19-inch rack-based cabinet | Chen, Jue, 1970-;
|
| Integrated product and its extended enterprise network design using lean principles | Choudhury, Abhijit Kumar, 1981-;
|
| Development of a geographic information system-based virtual geotechnical database and assessment of liquefaction potential for the St. Louis Metropolitan area | Chung, Jae-Won, 1971-;
|
| Mobile array designs with ANSERLIN antennas and efficient, wide-band PEEC models for interconnect and power distribution network analysis | Cracraft, Michael Andrew, 1978-;
|
| Bridge damage detection using an intelligent engineering system | Danilatos, Dionysios N., 1969-;
|
| Physical analysis of human hair | Dankers, Lea Marie, 1983-;
|
| Development, modeling, and simulation of a nano aerial vehicle using empirical data | Davenport, Wyatt Emery, 1984-;
|
| A real time operating system based test-bed for autonomous vehicle navigation | Dhake, Pravin, 1983-;
|
| Nonlinear control of nonholonomic mobile robot formations | Dierks, Travis, 1982-;
|
| Mechanical integrity and behavior of thin films and their applications in MEMS | Duan, Gang, 1978-;
|
| The development and application of a systematic approach to evaluating an academic department's brand meaning | Elrod, Cassandra Carlene, 1979-;
|
| Application of hybrid ARQ to controller area networks | Emani, Krishna Chaitanya Suryavenkata, 1983-;
|
| Architecting system of systems: artificial life analysis of financial market behavior | Ergin, Nil Hande, 1977-;
|
| Friction stir processing of cast magnesium alloys | Freeney, Timothy Alan, 1981-;
|
| Energy efficient processor operation and vibration based energy harvesting schemes for wireless sensor nodes | Gajjala, Phani Kumar, 1984-;
|
| A simulation environment modeling the use of wireless sensor networks for the detection and mapping of wildfires | Gann, Matthew, 1983-;
|
| Use of analytical hierarchy process in university strategy planning | Gokhale, Mihir, 1980-;
|
| Low-thrust control of a lunar orbiter | Harl, Nathan Robert, 1983-;
|
| Static evaluation of the out-of-plane behavior of URM infill walls utilizing modern blast retrofit systems | Hrynyk, Trevor D. (Trevor Daniel), 1982-;
|
| Operation of a brushless DC drive for application in hybrid electric vehicles | Jenkins, James Scott, 1981-;
|
| Distribution system operation and planning in the presence of distributed generation technology | Jones, Gavin Wesley, 1983-;
|
| A nonlinear optimization approach for UPFC power flow control and voltage security | Kalyani, Radha Padma, 1978-;
|
| A quantitative study of gene identification techniques based on evolutionary rationales | Kandoth, Cyriac, 1984-;
|
| Process development and applications of a dry film photoresist | Kanikella, Phaninder Reddy, 1983-;
|
| Pilot program to assess seismic hazards of the Granite City, Monks Mound, and Columbia Bottom quadrangles, St. Louis Metropolitan area, Missouri and Illinois | Karadeniz, Deniz, 1977-;
|
| The influence of printed circuit board design on TEM cell measurements | Kasturi, Vijay, 1984-;
|
| Incipient continental rifting: insights from the Okavango Rift Zone, northwestern Botswana | Kinabo, Baraka Damas, 1975-;
|
| Fast sphere decoder for MIMO systems | Krishnan, Praveen G., 1981-;
|
| An investigation of lead and other metal contaminants in the sediments of Clearwater Lake, Missouri | Krizanich, Gary W.;
|
| Converting some global optimization problems to mixed integer linear problems using piecewise linear approximations | Kumar, Manish, 1978-;
|
| A network infrastructure for real-time monitoring of campus energy consumption | Kunchum, Sandeep, 1984-;
|
| Toward improving performance measurement in public sector organizations | Kutz, Matthew T. (Matthew Thomas), 1976-;
|
| Antimicrobial activities of aldehydes and ketones produced during rapid volatilization of biogenic oils | Lamba, Aruna, 1978-;
|
| Generic algorithms and NULL Convention Logic hardware implementation for unsigned and signed quad-rail multiplication | Mallepalli, Samarsen Reddy, 1981-;
|
| Innovative solutions in bridge construction, rehabilitation, and structural health monitoring | Matta, Fabio, 1975-;
|
| Modular architecting for effects based operations | Meteoglu, Emel, 1983-;
|
| Simple and efficient solutions to the problems associated with acoustic echo cancellation | Mohammad, Asif Iqbal, 1980-;
|
| Real-time detection of grip length deviation for fastening operations: a Mahalanobis-Taguchi system (MTS) based approach | Mohan, Deepak (Deepak T.), 1982-;
|
| Magnetohydrodynamic power generation in a scramjet using a post combustor generator | Mundis, Nathan L. (Nathan Lee), 1981-;
|
| Detection of flash in dermoscopy skin lesion images | Nagane, Radhika, 1983-;
|
| Effects of combined exposure to ethanol and ionizing radiation on the antioxidant status of in vitro and in vivo models | Ogony, Joshua (Joshua Were), 1966-;
|
| Optimal formation of supplier networks for product design and production phases to realize an evolving product family | Pakala, Padmavathi Krishna, 1982-;
|
| Delay-insensitive ternary logic (DITL) | Parameswaran Nair, Ravi Sankar, 1983-;
|
| Screening new cytokinesis genes and investigation of regulation of Hof1 in cytokinesis | Park, Jung Eun, 1979-;
|
| Current measurement in power electronic and motor drive applications - a comprehensive study | Patel, Ashaben Mehul, 1981-;
|
| A software defined radio for research into cognitive radio | Pratt, Jason Michael, 1984-;
|
| Microfluidic biosensors for intelligent metabolite monitoring | Radhakrishnan, Nitin, 1983-;
|
| Printed circuit board (PCB) loss characterization up-to 20 GHz and modeling, analysis and validation | Rajagopal, Abhilash, 1981-;
|
| Diversity techniques for signal-strength based indoor location determination | Ramachandran, Anil, 1983-;
|
| Device signal detection methods and time frequency analysis | Ravirala, Narayana, 1983-;
|
| Performance improvements of automobile communication protocols in electromagnetic interference environments | Ren, Fei, 1983-;
|
| Experimental and analytical evaluation of FRP-confined large size reinforced concrete columns | Rocca, Silvia, 1977-;
|
| Empirical investigation of enhanced air fins | Rucker, Stephen J. D. (Stephen John Dale), 1982-;
|
| Best practices for implementing a biodiesel program | Sadashivam, Sundaresan, 1982-;
|
| BGA footprints modeling and physics based via models validation for power and signal integrity applications | Selli, Giuseppe, 1975-;
|
| Vision based leader-follower formation control for mobile robots | Sequeira, Gerard, 1982-;
|
| Refrigerant-based propulsion system for small spacecraft | Seubert, Carl Reiner, 1982-;
|
| Properties of alkaline-resistant calcium-iron-phosphate glasses | Shi, Jiawanjun, 1981-;
|
| Reinforcement-learning based output-feedback controller for nonlinear discrete-time system with application to spark ignition engines operating lean and EGR | Shih, Peter, 1980-;
|
| Cognitive biases in risk management | Siefert, William Thomas, 1947-;
|
| A guide to the establishment of a university satellite program | Stewart, Abbie Marie, 1982-;
|
| Towards a methodology for integrated freeform manufacturing systems development with a control systems emphasis | Stroble, Jacquelyn Kay, 1982-;
|
| Characterization of coarse aggregate angularity using digital image processing | Swift, Gregory Allen, 1971-;
|
| Enhanced functional analysis system technique for managing complex engineering projects | Tan, Sofia, 1980-;
|
| Security analysis of a cyber-physical system | Tang, Han, 1979-;
|
| Energy-aware and secure routing with trust levels for wireless ad hoc and sensor networks | Taqieddin, Eyad Salah, 1976-;
|
| Interactive and dialogue based learning in engineering education | Thummuri, Siddartha, 1981-;
|
| E-design tools for friction stir welding: cost estimation tool | Tipaji, Pradeep Kumar, 1983-;
|
| An indirect loss estimation methodology to account for regional earthquake damage to highway bridges | Tirasirichai, Chakkaphan, 1979-;
|
| Security architecture methodology for large net-centric systems | Umeh, Njideka Adaku, 1974-;
|
| An open framework for highly concurrent hardware-in-the-loop simulation | Underwood, Ryan C., 1980-;
|
| Neural network control of nonstrict feedback and nonaffine nonlinear discrete-time systems with application to engine control | Vance, Jonathan Blake, 1981-;
|
| Robust Mechanism synthesis with random and interval variables | Venigella, Pavan Kumar, 1983-;
|
| CFD simulation of contact planarization | Vusirikala, Shanti, 1984-;
|
| Field and laboratory investigation of ozone-indoor surface reactions: secondary emissions inventory and implications for indoor air quality | Wang, Hong, 1978-;
|
| Executable system architecting using systems modeling language in conjunction with Colored Petri Nets - a demonstration using the GEOSS network centric system | Wang, Renzhong, 1975-;
|
| The leaching behavior of arsenic, selenium and other trace elements in coal fly ash | Wang, Tian, 1976-;
|
| Hyphenated HPLC-MS technique for analysis of compositional monosaccharides of transgenic corn glycoprotein and characterization of degradation products of diazinon, fonofos and aldicarb in various oxidation systems | Wang, Tongwen, 1968-;
|
| An exploratory study of the videoblogger's community | Warmbrodt, John W. (John William), 1982-;
|
| The importance and influence of groundwater fluctuations in phytoremediation | Weishaar, Jeff, 1980-;
|
| Advanced controller design using neural networks for nonlinear dynamic systems with application to micro/nano robotics | Yang, Qinmin, 1979-;
|
| On-line inspection and thermal properties comparison for laser deposition process | Yang, Yu, 1973-;
|
| Sensor network coverage and data aggregation problem: solutions toward the maximum lifetime | Yin, Li, 1981-;
|
| Empirical dynamic modeling and nonlinear force control of friction stir welding | Zhao, Xin, 1978-;
|
| Modeling and control of freeze-form extrusion fabrication | Zhao, Xiyue, 1980-;
|
| Management of an intelligent argumentation network for a web-based collaborative engineering design environment | Zheng, Man, 1979-;
|
| Configuration, manufacture, assembly, and integration of a university microsatellite | Ziegler, Lori Ann, 1982-;
|
