Missouri S&T Research - Hubing, Todd H.

Prospective StudentsCurrent StudentsAlumni & FriendsCommunityFaculty & Staff

Missouri S&T Scholar's Mine Research Repository

Scholars' Mine
Missouri S&T
Research Repository

Curtis Laws Wilson Library
400 W. 14th Street
Rolla, MO 65409-0060
scholarsmine@mst.edu

Author: Hubing, Todd H.

1989 1990 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004
2005 2006 2007 2008

2008 TOP

Title	Author(s)
Estimating maximum radiated emissions from printed circuit boards with an attached cable	Deng, Shaowei; Hubing, Todd H.; Beetner, Daryl G.;
An experimental investigation of higher order mode suppression in TEM cells	Deng, Shaowei; Pommerenke, David; Hubing, Todd H.; Shin, Dongshik;
Using TEM cell measurements to estimate the maximum radiation from PCBs with cables due to magnetic field coupling	Deng, Shaowei; Hubing, Todd H.; Beetner, Daryl G.;

2007 TOP

Title	Author(s)
Characterizing the electric field coupling from IC heatsink structures to external cables using TEM cell measurements	Deng, Shaowei; Hubing, Todd H.; Beetner, Daryl G.;
Mode suppressed TEM cell design for high frequency IC measurements	Beetner, Daryl G.; Deng, Shaowei; Drewniak, James L.; Hubing, Todd H.; Kim, Sungnam; Kwak, Hocheol; Pommerenke, David; Shin, Dongshik;
Validation of worst-case and statistical models for an automotive EMC expert system	Beetner, Daryl G.; Weng, Haixiao; Wu, Meilin; Hubing, Todd H.;

2006 TOP

Title	Author(s)
Analysis of radiated emissions from a printed circuit board using expert system algorithms	Fu, Yan; Hubing, Todd H.;
Basic concepts in EMC for ICs	Hubing, Todd H.; Sicard, E.;
Calculating static field and charge distributions using full-wave boundary element methods	Haixin Ke; Hubing, Todd H.;
Circuit models for power bus structures on printed circuit boards using a hybrid FEM-SPICE method	Chunlei Guo; Hubing, Todd H.;
A closed-form expression for estimating radiated emissions from the power planes in a populated printed circuit board	Hwan-Woo Shim; Hubing, Todd H.;
Detection and identification of vehicles based on their unintended electromagnetic emissions	Dong, Xiaopeng; Weng, Haixiao; Beetner, Daryl G.; Hubing, Todd H.; Wunsch, Donald C.; Noll, Michael; Goksu, Huseyin; Moss, Benjamin;
Historical review and state of the art	Hubing, Todd H.; Sicard, E.;
Matched filter detection and identification of electronic circuits based on their unintentional radiated emissions	Shaik, Ahmed; Weng, Haixiao; Dong, Xiaopeng; Hubing, Todd H.; Beetner, Daryl G.;
Quantifying electric and magnetic field coupling from integrated circuits with TEM cell measurements	Kasturi, V.; Deng, S.; Hubing, Todd H.; Beetner, Daryl G.;

2005 TOP

Title	Author(s)
Analysis of a low-pass filter employing a 4-pin capacitor	Zeeff, T.M.; Ritter, A.; Hubing, Todd H.; Van Doren, T.;
Analytical model for the rectangular power-ground structure including radiation loss	Chen, R.L.; Chen, Ji; Hubing, Todd H.; Shi, Weimin;
Application of transmission line models to backpanel plated through-hole via design	Shaowei Deng; Hubing, Todd H.; Drewniak, James L.; Jun Fan; Knighten, J.L.; Smith, N.W.;
A Brief History of EMC Education	Hubing, Todd H.; Orlandi, Antonio;
Derivation of a closed-form approximate expression for the self-capacitance of a printed circuit board trace	Shim, H.W.; Hubing, Todd H.;
Determination of high frequency package currents from near-field scan data	Xiaopeng Dong; Shaowei Deng; Beetner, Daryl G.; Hubing, Todd H.; Van Doren, T.P.;
Effective preconditioners for the solution of hybrid FEM/MoM matrix equations using combined formulations	Guo, C.; Hubing, Todd H.;
Effective strategies for choosing and locating printed circuit board decoupling capacitors	Hubing, Todd H.;
Model for estimating radiated emissions from a printed circuit board with attached cables due to Voltage-driven sources	Hwan-Woo Shim; Hubing, Todd H.;
Neural network detection and identification of electronic devices based on their unintended emissions	Haixiao Weng; Xiaopeng Dong; Xiao Hu; Beetner, Daryl G.; Hubing, Todd H.; Wunsch, Donald C.;
Traces in proximity to gaps in return planes	Zeeff, T.M.; Hubing, Todd H.; Van Doren, T.P.;
Using an LU recombination method to improve the performance of the boundary element method at very low frequencies	Ke, Haixin; Hubing, Todd H.;

2004 TOP

Title	Author(s)
Analysis of chip-level EMI using near-field magnetic scanning	Dong, X.; Deng, S.; Hubing, Todd H.; Beetner, Daryl G.;
Effects of open stubs associated with plated through-hole vias in backpanel designs	Shaowei Deng; Jingkun Mao; Hubing, Todd H.; Drewniak, James L.; Jun Fan; Knighten, J.L.; Smith, N.W.; Alexander, R.;
Expert system algorithms for identifying radiated emission problems in printed circuit boards	Shim, H.; Hubing, Todd H.; Van Doren, T.; DuBroff, Richard E.; Drewniak, James L.; Pommerenke, David; Kaires, R.;
Investigation of cavity resonances in an automobile	Haixiao Weng; Beetmer, D.G.; Hubing, Todd H.; Xiaopeng Dong; Wiese, R.; McCallum, J.;
A preliminary study of maximum system-level crosstalk at high frequencies for coupled transmission lines	Dong, X.; Weng, H.; Beetner, Daryl G.; Hubing, Todd H.; Wiese, R.; McCallum, J.;
Radiated emissions from populated printed circuit boards due to power bus noise	Shim, H.; Fu, Y.; Hubing, Todd H.;
Radiation mechanisms for semiconductor devices and packages	Hubing, Todd H.; Beetner, Daryl G.; Deng, S.; Dong, X.;
Via coupling within power-return plane structures considering the radiation loss	Chen, R.L.; Chen, J.; Hubing, Todd H.; Shi, W.;

2003 TOP

Title	Author(s)
Analysis of simple two-capacitor low-pass filters	Zeeff, T.M.; Hubing, Todd H.; Van Doren, T.P.; Pommerenke, David;
Application of the cavity model to lossy power-return plane structures in printed circuit boards	Minjia Xu; Hao Wang; Hubing, Todd H.;
The development of a closed-form expression for the input impedance of power-return plane structures	Xu, Minjia; Hubing, Todd H.;
Impedance boundary conditions in a hybrid FEM/MOM formulation	Hao Wang; Minjia Xu; Chen Wang; Hubing, Todd H.;
A numerical investigation of interior resonances in the hybrid FEM/MoM method	Ji, Yun; Wang, Hao; Hubing, Todd H.;
PCB EMC design guidelines: a brief annotated list	Hubing, Todd H.;
Power-bus decoupling with embedded capacitance in printed circuit board design	Xu, Minjia; Hubing, Todd H.; Chen, J.; Van Doren, T.P.; Drewniak, James L.; DuBroff, Richard E.;
Printed circuit board EMI source mechanisms	Hubing, Todd H.;

2002 TOP

Title	Author(s)
Application of higher-order FEM elements to the analysis of microstrip structures	Wang, H.; Guo, C.L.; Hubing, Todd H.; Drewniak, James L.; Van Doren, T.P.; DuBroff, Richard E.;
Decoupling strategies for printed circuit boards without power planes	Shim, H.W.; Zeeff, T.M.; Hubing, Todd H.;
Estimating the power bus impedance of printed circuit boards with embedded capacitance	Xu, Minjia; Hubing, Todd H.;
An expert system architecture to detect system-level automotive EMC problems	Ranganathan, S.; Beetner, Daryl G.; Wiese, R.; Hubing, Todd H.;
Field extraction from near field scanning for a microstrip structure	Zhang, Lin; Slattery, K.P.; Wang, Chen; Yamaguchi, M.; Arai, K.-I.; DuBroff, Richard E.; Drewnial, J.L.; Pommerenke, David; Hubing, Todd H.;
Finite-element modeling of coaxial cable feeds and vias in power-bus structures	Wang, Hao; Ji, Yun; Hubing, Todd H.;
On the interior resonance problem when applying a hybrid FEM/MoM approach to model printed circuit boards	Yun Ji; Hubing, Todd H.;
On the modeling of a gapped power-bus structure using a hybrid FEM/MoM approach	Ji, Yun; Hubing, Todd H.;
Power bus isolation using power islands in printed circuit boards	Chen, J.; Hubing, Todd H.; Van Doren, T.P.; DuBroff, Richard E.;
Reducing power bus impedance at resonance with lossy components	Zeeff, T.M.; Hubing, Todd H.;

2001 TOP

Title	Author(s)
20-H rule modeling and measurements	Shim, H.W.; Hubing, Todd H.;
Applying the method of moments and the partial element equivalent circuit modeling techniques to a special challenge problem of a PC board with long wires attached	Yun Ji; Archambeault, B.; Hubing, Todd H.;
Challenge problem update: PEEC and MOM analysis of a PC board with long wires attached	Wang, H.; Archambeault, B.; Hubing, Todd H.;
EMI considerations in selecting heat-sink-thermal-gasket materials	Huang, Yu; Butler, J.E.; de Sorgo, M.; DuBroff, Richard E.; Hubing, Todd H.; Drewniak, James L.; van Doren, T.P.;
An EMI estimate for shielding-enclosure evaluation	Li, Min; Drewniak, James L.; Radu, S.; Nuebel, J.; Hubing, Todd H.; DuBroff, Richard E.; van Doren, T.P.;
Estimation of printed circuit board power bus noise at resonance using a simple transmission line model	Hu, H.; Hubing, Todd H.; Van Doren, T.;
FDTD and experimental investigation of EMI from stacked-card PCB configurations	Hockanson, D.M.; Xiaoning Ye; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.; DuBroff, Richard E.;
Improving the high-frequency attenuation of shunt capacitor, low-pass filters	Olsen, C.N.; Van Doren, T.P.; Hubing, Todd H.; Drewniak, James L.; DuBroff, Richard E.;
Mitigating power bus noise with embedded capacitance in PCB designs	Minjia Xu; Hubing, Todd H.; Juan Chen; Drewniak, James L.; Van Doren, T.P.; DuBroff, Richard E.;
Quantifying SMT decoupling capacitor placement in dc power-bus design for multilayer PCBs	Fan, Jun; Drewniak, James L.; Knighten, J.L.; Smith, N.W.; Orlandi, A.; Hubing, Todd H.; Van Doren, T.P.; DuBroff, Richard E.;
Reducing power bus impedance at resonance with lossy components	Zeeff, T.M.; Hubing, Todd H.;

2000 TOP

Title	Author(s)
Development of a closed-form expression for the input impedance of power-ground plane structures	Xu, Minjia; Ji, Yun; Hubing, Todd H.; Van Doren, T.P.; Drewniak, James L.;
EMC analysis of an 18" LCD monitor	Zeeff, T.M.; Hubing, Todd H.; Drewniak, James L.; DuBroff, R.E.; Van Doren, T.P.;
The EMI benefits of ground plane stitching in multi-layer power bus stacks	Ye, Xiaoning; Hockanson, D.M.; Li, Min; Cui, Wei; Radu, S.; Drewniak, James L.; VanDoren, T.P.; Hubing, Todd H.; DuBroff, Richard E.;
EMI from airflow aperture arrays in shielding enclosures-experiments, FDTD, and MoM modeling	Min Li; Nuebel, J.; Drewniak, James L.; DuBroff, Richard E.; Hubing, Todd H.; Van Doren, T.P.;
EMI from cavity modes of shielding enclosures-FDTD modeling and measurements	Min Li; Nuebel, J.; Drewniak, James L.; DuBroff, Richard E.; Hubing, Todd H.; van Doren, T.P.;
EMI reduction from airflow aperture arrays using dual-perforated screens and loss	Min Li; Nuebel, J.; Drewniak, James L.; Hubing, Todd H.; DuBroff, Richard E.; Van Doren, T.P.;
Experimental and FDTD study of the EMI performance of an open-pin-field connector for modules-on-backplanes	Xiaoning Ye; Nadolny, J.; Drewniak, James L.; DuBroff, Richard E.; VanDoren, T.P.; Hubing, Todd H.;
Experimental and numerical study of the radiation from microstrip bends	Wang, H.; Ji, Y.; Hubing, Todd H.; Drewniak, James L.; van Doren, T.P.; DuBroff, Richard E.;
Experimental evaluation of power bus decoupling on a 4-layer printed circuit board	Chen, Juan; Drewniak, James L.; DuBroff, Richard E.; Hubing, Todd H.; Van Doren, T.P.; Xu, Minjia;
FDTD and FEM/MOM modeling of EMI resulting from a trace near a PCB edge	Berg, D.; Tanaka, M.; Ji, Y.; Ye, X.; Drewniak, James L.; Hubing, Todd H.; DuBroff, R.E.; Van Doren, T.P.;
Finite element modeling of patch antenna and cavity sources	Ji, Y.; Hubing, Todd H.; Drewniak, James L.;

1999 TOP

Title	Author(s)
Anticipating EMI from coupling between high-speed digital and I/O lines	Cui, W.; Li, M.; Luo, X.; Drewniak, James L.; Hubing, Todd H.; VanDoren, T.P.; DuBroff, Richard E.;
Application of a hybrid FEM/MOM method to a canonical PCB problem	Ji, Y.; Chen, J.; Hubing, Todd H.; Drewniak, James L.;
EMI associated with inter-board connection for module-on-backplane and stacked-card configurations	Ye, X.; Nadolny, J.; Drewniak, James L.; Hubing, Todd H.; Vaudoren, T.P.; DuBroff, Richard E.;
FDTD modeling of EMI antennas	Tanaka, M.; Wei Cui; Xiao Luo; Drewniak, James L.; Hubing, Todd H.; van Doren, T.P.; DuBroff, Richard E.;
Microstrip coupling algorithm validation and modification based on measurements and numerical modeling	Zeeff, T.; Olsen, C.E.; Hubing, Todd H.; Drewniak, James L.; DuBroff, Richard E.;
Power bus noise reduction using power islands in printed circuit board designs	Hubing, Todd H.; Chen, J.; Drewniak, James L.; Van Doren, T.; Ren, Y.; Fan, J.; DuBroff, Richard E.;
RF isolation using power islands in DC power bus design	Fan, Jun; Ren, Yong; Chen, Juan; Hockanson, D.M.; Shi, Hao; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.; DuBroff, Richard E.;
Signal induced EMI in fibre channel cable-connector assemblies	Xu, M.; Radu, S.; Knighten, J.L.; Drewniak, James L.; Hubing, Todd H.; Hoeft, L.O.; DiBene, J.T., II.;
Slot and aperture coupling for airflow aperture arrays in shielding enclosure designs	Li, M.; Drewniak, James L.; Hubing, Todd H.; DuBroff, Richard E.; VanDoren, T.P.;

1998 TOP

Title	Author(s)
Considerations for magnetic-field coupling resulting in radiated EMI	Hockanson, D.; Drewniak, James L.; DuBroff, Richard E.; Hubing, Todd H.; Van Doren, T.P.;
Designing power bus decoupling for CMOS devices	Radu, S.; DuBroff, Richard E.; Hubing, Todd H.; Van Doren, T.P.;
Design of airflow aperture arrays in shielding enclosures	Li, M.; Radu, S.; Neubel, J.; Drewniak, James L.; Hubing, Todd H.; VanDoren, T.P.;
EMC applications of the EMAP5 hybrid FEM/MOM code	Yun Ji; Ali, M.W.; Hubing, Todd H.;
An impact of layer stack-up on EMI	Radu, S.; Zeeff, T.; Nuebel, J.; Drewniak, James L.; Van Doren, T.P.; Hubing, Todd H.;
Incorporating vertical discontinuities in power-bus modeling using a mixed-potential integral equation and circuit extraction formulation	Fan, J.; Shi, H.; Drewniak, James L.; Hubing, Todd H.; DuBroff, Richard E.; Van Doren, T.P.;
Modeling multilayered PCB power-bus designs using an MPIE based circuit extraction technique	Hao Shi; Jun Fan; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;

1997 TOP

Title	Author(s)
Comparison of FDTD algorithms for subcellular modeling of slots in shielding enclosures	Kuang-Pin Ma; Min Li; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Effects of gapped groundplanes and guard traces on radiated EMI	Britt, D.S.; Hockanson, D.M.; Sha, F.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
EMI from apertures at enclosure cavity mode resonances	Li, M.; Ji, Y.; Radu, S.; Nuebel, J.; Cui, W.; Drewniak, James L.; Hubing, Todd H.; VanDoren, T.P.;
An experimental procedure for characterizing interconnects to the DC power bus on a multilayer printed circuit board	Shi, H.; Fei Sha; Drewniak, James L.; Van Doren, T.P.; Hubing, Todd H.;
An expert system for predicting radiated EMI from PCB's	Kashyap, N.; Hubing, Todd H.; Drewniak, James L.; Van Doren, T.;
A hybrid FEM/MOM technique for electromagnetic scattering and radiation from dielectric objects with attached wires	Ali, M.W.; Hubing, Todd H.; Dreniak, J.L.;
Identifying an EMI source and coupling path in a computer system with sub-module testing	Radu, S.; Ji, Y.; Nuebel, J.; Drewniak, James L.; Van Doren, T.P.; Hubing, Todd H.;
Investigation of internal partitioning in metallic enclosures for EMI control	Radu, S.; Li, M.; Nuebel, J.; Hockanson, D.M.; Ji, Y.; Drewniak, James L.; Hubing, Todd H.; VanDoren, T.P.;
Numerical and experimental corroboration of an FDTD thin-slot model for slots near corners of shielding enclosures	Min Li; Kuang-Ping Ma; Hockanson, D.M.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Quantifying EMI resulting from finite-impedance reference planes	Hockanson, D.M.; Drewniak, J.L.; Hubing, Todd H.; van Doren, T.P.; Fei Sha; Cheung-Wei Lam;

1996 TOP

Title	Author(s)
A comparison of an FDTD thin-slot algorithm and method of moments for modeling slots near corners	Ma, K.-P.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Experimental and numerical investigations of fundamental radiation mechanisms in PCB designs with attached cables	Hockanson, D.M.; Lam, C.-W.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
An expert system approach to EMC modeling	Hubing, Todd H.; Drewniak, James L.; Van Doren, T.; Kashyap, N.;
FDTD modeling of common-mode radiation from cables	Hockanson, D.M.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Investigation of fundamental EMI source mechanisms driving common-mode radiation from printed circuit boards with attached cables	Hockanson, D.M.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.; Fei Sha; Wilhelm, M.J.;
Simulation and measurement for decoupling on multilayer PCB DC power buses	Shi, H.; Yuan, F.; Sha, F.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;

1995 TOP

Title	Author(s)
Diagnosing and modeling common-mode radiation from printed circuit boards with attached cables	Drewniak, James L.; Fei Sha; Van Doren, T.P.; Hubing, Todd H.; Shaw, J.;
An experimental investigation of 4-layer printed circuit board decoupling	Hubing, Todd H.; Van Doren, T.; Sha, F.; Drewniak, James L.; Wilhelm, M.;
FDTD modeling of thin wires for simulating common-mode radiation from structures with attached cables	Hockanson, D.M.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Integrating electromagnetic compatibility laboratory exercises into undergraduate electromagnetics	Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.; Fei Sha;
Power bus decoupling on multilayer printed circuit boards	Hubing, Todd H.; Drewniak, James L.; Van Doren, T.P.; Hockanson, D.M.;
Stop that noise	Van Doren, T.; Hubing, Todd H.; Drewniak, James L.; Fei Sha; Hockanson, D.;

1994 TOP

Title	Author(s)
Application of the finite-difference time-domain method to radiation from shielded enclosures	Hockanson, D.M.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Common mode currents induced on wires attached to multilayer printed wire boards with segmented ground planes	Hill, R.L.; Van Doren, T.; Hubing, Todd H.; Drewniak, James L.; Gisn, F.;
Identifying and quantifying printed circuit board inductance	Hubing, Todd H.; Van Doren, T.P.; Drewniak, James L.;
Investigation of fundamental mechanisms of common-mode radiation from printed circuit boards with attached cables	Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Modeling power bus decoupling on multilayer printed circuit boards	Drewniak, James L.; Hubing, Todd H.; VanDoren, T.P.; Baudendistal, P.;
A modular approach to numerical EM modeling	Hubing, Todd H.;
The role of component packaging in system electromagnetic compatibility	Hubing, Todd H.;

1993 TOP

Title	Author(s)
An algorithm for automated printed circuit board layout and routing evaluation	Hubing, Todd H.; Grover, P.; Van Doren, T.; Drewniak, James L.; Hill, L.;
EMC applications of EMAP-2: a 3D finite element modeling code	Hubing, Todd H.; Ali, M.;

1992 TOP

Title	Author(s)
New EMC design guidelines for multilayer printed wiring boards	Hubing, Todd H.; Van Doren, T.P.;

1990 TOP

Title	Author(s)
Bundled cable parameters and their impact on EMI measurement repeatability	Hubing, Todd H.;

1989 TOP

Title	Author(s)
The effect of cable terminations on EMI measurements	Hubing, Todd H.;
Modeling the electromagnetic radiation from electrically small table-top products	Hubing, Todd H.; Kaufman, J.F.;