|
Title |
Author(s) |
|---|
| Accuracy of the HCM 2000 queue clearance model: case of multiple approach lanes with shared left turns and multiple opposing lanes | Foil, Shannon L.;
Qureshi, Mohammad;
|
| Adsorption isotherms for Methyl Tert-Butyl Ether and other fuel oxygenates on two Bituminous-Coal activated Carbons | Yu, L.;
Adams, Craig D.;
Ludlow, Douglas K.;
|
| Analysis of URM concrete walls strengthened with GFRP bars | Li, Tong;
Galati, Nestore;
Tumialan, Gustavo J.;
Nanni, Antonio;
|
| Behavior of cold-formed steel built-up I-sections | Stone, T.A.;
LaBoube, Roger A.;
|
| Behavior of thin gusset plates in compression | Lutz, D.G.;
LaBoube, Roger A.;
|
| Bonded composite patch design for aircraft structures exhibiting cracking and corrosion | Singh, M.;
Schonberg, William;
|
| Characterization of RC beams strengthened by steel reinforced polymer and grout (SRP & SRG) composites | Barton, Bryce L;
Wobbe, E.;
Dharani, Lokesh;
Silva, Pedro;
Birman, Victor;
Nanni, Antonio;
Alkhrdaji, T.;
Tunis, G.;
|
| Comprehensive shear-wave velocity study in the Poplar Bluff area, southeast Missouri | Anderson, Neil L.;
Hoffman, David J.;
Liu, Wanxing;
Luna, Ronaldo;
Stephenson, Richard Wesley;
Thitimakorn, T.;
|
| Crack detection of a full-scale reinforced concrete girder with a distributed cable sensor | Chen, Genda;
Sun, S.;
Pommerenke, David;
Drewniak, James L.;
Green, Gary Gordon;
McDaniel, R.D.;
Belarbi, Abdeldjelil (DJ);
Mu, H.;
|
| Crack mapping in RC members using distributed coaxial cable crack sensors: modeling and application | Greene, Gary G.;
Belarbi, Abdeldjelil (DJ);
Chen, Genda;
|
| Design standards for cold-formed steel framing | LaBoube, Roger A.;
Larson, J.W.;
|
| Distributed coaxial cable crack sensors for crack mapping in RC | Greene, Gary G.;
Belarbi, Abdeldjelil (DJ);
Chen, Genda;
McDaniel, G. Ryan;
|
| Distributed crack sensors featuring unique memory capability for post-earthquake condition assessment of RC structures | Chen, Genda;
McDaniel, Ryan;
Sun, Shishuang;
Pommerenke, David;
Drewniak, James L.;
|
| Durability performance of bridge concretes, part I: high performance concrete (HPC) | Ekenel, Mahmut;
Myers, John;
|
| Durability performance of bridge concretes, Part II: high-strength concrete (HSC) | Ekenel, Mahmut;
Myers, John;
|
| Effectiveness of CFRP strengthening on curved soffit RC beams | Eshwar, Nagaraj;
Ibell, Timothy James;
Nanni, Antonio;
|
| Effect of environmental conditions on bond strength between CFRP laminate and concrete substrate | Myers, John;
Ekenel, Mahmut;
|
| Endocrine disrupting compounds removal from wastewater, a new challenge | Auriol, M.;
Filali-Meknassi, Y.;
Rajeshwar D. Tyagi.;
Surampalli, R.;
|
| Engineered struvite precipitation: impacts of component-ion molar ratios and ph | Wang, Jun.;
Burken, Joel G.;
Zhang, Xiaoqi.;
Surampalli, Rao Y;
|
| Evaluation of a prototype GIS learning system to teach civil engineering concepts | Hall, Richard H.;
Luna, Ronaldo;
Hilgers, Michael Gene;
Sullivan, John.;
Lawrence, William;
Buechler, Matt Ryan;
|
| Flexural behavior of fiber-reinforced-concrete beams reinforced with FRP rebars | Wang, H.;
Belarbi, Abdeldjelil (DJ);
|
| FRP strengthening of URM walls with openings - numerical analysis and design | Li, Tong;
Galati, Nestore;
Tumialan, Gustavo;
Nanni, Antonio;
|
| Growth model for sand wavelets | Zhou, D.;
Mendoza, Cesar;
|
| Impact of food disinfection on beneficial Biothiol contents in vegetables | Qiang, Z.;
Demirko, O.;
Ercal, Nuran;
Adams, Craig D.;
|
| Impacts of component-ion molar ratios and pH in Struvite precipitation | Wang, J.;
Burken, Joel G.;
Zhang, X.;
Surampalli, R.;
|
| The influence of ammonia and carbon dioxide on the sorption of a basic organic pollutant to a mineral surface | Ongwandee, M.;
Bettinger, S.S.;
Morrison, Glenn;
|
| Inhibition of microbial metabolism in anaerobic lagoons by selected Sulfonamides, Tetracyclines, Lincomycin, and Tylosin Tartrate | Loftin, K.;
Henny, C.;
Adams, Craig D.;
Surampalli, Rao Y;
Mormile, Melanie R.;
|
| In situ load testing of parking garage reinforced concrete slabs: Comparison between 24 h and cyclic load testing | Casadei, Paolo;
Parretti, Renato;
Nanni, Antonio;
Heinze, Tom;
|
| Iterative usability evaluation methods applied to learning technology development | Sullivan, John;
Hall, Richard H.;
Hilgers, Michael Gene;
Luna, Ronaldo;
Buechler, Matt Ryan;
Lawrence, William T.;
|
| Learning system to introduce GIS to civil engineers | Luna, Ronaldo;
Lawrence, William T.;
Sullivan, John M.;
Hall, Richard H.;
Hilgers, Michael Gene;
Buechler, Matt Ryan;
|
| Membrane bioreactor technology | Fitch, Mark W.;
|
| Modal perturbation method for the dynamic characteristics of timoshenko beams | Lou, Meng-Lin;
Duan, Quihua;
Chen, Genda;
|
| Numerical modeling of cyclic mobility in saturated soil | Bao, Y.;
Sture, S.;
Ko, H.-Y.;
|
| Out-of-plane static and blast resistance of unreinforced masonry wall connections strengthened with FRP | Carney, Pat;
Myers, John;
|
| Performance of corrosion-damaged RC columns repaired by CFRP sheets | Bae, S.W.;
Belarbi, Abdeldjelil (DJ);
Myers, J.J.;
|
| Performance of double-T prestressed concrete beams strengthened with steel reinforced polymer | Casadei, Paolo;
Nanni, Antonio;
Alkhrdaji, Tarek;
Thomas, Jay;
|
| Phytoremediation of vadose zone VOC's | Struckoff, G.;
Burken, Joel G.;
Schumaker, J.;
|
| Preliminary assessment of the lower landing minima capabilities in the SATS program | Xu, Y.;
Trani, A. A.;
Baik, Hojong;
|
| Prestress loss measurements in Missouri's first fully instrumented HPC bridge | Yang, Yumin;
Myers, John;
|
| Properties and potential for application of steel reinforced polymer and steel reinforced grout composites | Huang, X.;
Birman, Victor;
Nanni, Antonio;
Tunis, G.;
|
| Recent advances and progress in design codes connections | LaBoube, Roger A.;
|
| Rehabilitation of compression steel members using FRP pipes filled with non-expansive and expansive light-weight concrete | Liu, Xiangdong;
Nanni, Antonio;
Silva, Pedro F.;
|
| Repair of bridge girders with composites: Experimental and analytical validation | Ludovico, Marco Di;
Nanni, Antonio;
Prota, Andrea;
Cosenza, Edoardo;
|
| A soft post-earthquake damage identification methodology using vibration time series | Xu, Bin;
Wu, Zhishen;
Yokoyama, Koichi;
Harada, Takao;
Chen, Genda;
|
| Spatial bioaccumulation modeling in a network of Bayous | Luna, Ronaldo;
Watanabe, Karen H.;
Wilding, Andrew J;
|
| Steel-free hybrid reinforcement system for concrete bridge deck | Gopalaratnam, Vellore S.;
Meyer, John;
De Young, Kenny;
Belarbi, Abdeldjelil (DJ);
Wang, Huanzi;
|
| Tensile characterization of glass FRP bars | Kocaoz, S.;
Nanni, Antonio;
Samaranayake, V. A.;
|
| Thermal effects on bond between FRP rebars and concrete | Galati, Nestore;
Nanni, Antonio;
Dharani, Lokesh;
Focacci, F.;
Aiello, M.A.;
|
| Toluene removal in membrane bioreactors under recirculating and non-recirculating liquid conditions | England, E.;
Fitch, Mark W.;
Mormile, Melanie R.;
Roberts, M.;
|
| Treatability of Alternative Fuel Oxygenates using Advanced Oxidation, Air Stripping and Carbon Adsorption | Sutherland, J.;
Adams, Craig D.;
Kekobad, J.;
|
| Trihalomethane and Haloacetic Acid Disinfection By-Products in Full-Scale Drinking Water Systems | Adams, Craig D.;
Timmons, T.;
Seitz, T.;
Lane, J.;
Levotch, S.;
|
| Unconstrained optimization and calibration of a kinematic-cyclic plasticity model | Bao, Y.;
Ge, Yu-Ning (Louis);
Sture, S.;
|
| Vapor-phase exchange of perchloroethene between soil and plants | Struckhoff, G.;
Burken, Joel G.;
Schumacher, J.G.;
|
| Volatile organic compound fate in phytoremediation applications : Natural and engineered systems | Burken, Joel G.;
Ma, X.M.;
Struckhoff, G.C.;
Gilbertson, A.W.;
|
| Water quality in Lemoa, Guatemala | Elmore, A.;
Miller, G.R.;
Parker, Bryan Lewis;
|
