|
Title |
Author(s) |
|---|
| Aqueous-based extrusion of high solids loading ceramic pastes: process modeling and control | Mason, Michael S.;
Huang, Tieshu;
Landers, Robert G.;
Leu, Ming C.;
Hilmas, Greg;
|
| Automatic gap detection in friction stir butt welding operations | Yang, Yu;
Kalya, Prabhanjana;
Landers, Robert G.;
Krishnamurthy, K.;
|
| Behavior of a composite multidisk clutch subjected to mechanical and frictionally excited thermal load | Zhao, Shuangmei;
Hilmas, Greg;
Dharani, Lokesh;
|
| Characterization of dielectric particles by impedance spectroscopy (Part I) | Petrovsky, Vladimir;
Petrovsky, Tatiana;
Kamlapurkar, Swetha;
Dogan, Fatih;
|
| Enhanced densification and mechanical properties of ZrB₂–SiC processed by a preceramic polymer coating route | Zhu, Sumin;
Fahrenholtz, William G.;
Hilmas, Greg;
|
| Feasibility of processing steelmaking slag for carbon dioxide sequestration and metal recovery | Rawlins, C.H.;
Peaslee, Kent D.;
Richards, Von;
|
| Freeze-cast hydroxyapatite scaffolds for bone tissue engineering applications | Fu, Qiang;
Rahaman, Mohamed;
Dogan, Fatih;
Sonny Bal, B.;
|
| Freeze casting of porous hydroxyapatite scaffolds – II Sintering, microstructure, and mechanical behavior | Fu, Qiang;
Rahaman, Mohamed;
Dogan, Fatih;
Bal, B. Sonny;
|
| High-velocity impact resistance of ZrB₂-SiC | Henderson, Stewart;
Fahrenholtz, William G.;
Hilmas, Greg;
Marschall, Jochen;
|
| Image processing, geometric modeling and data management for development of a virtual bone surgery system | Niu, Qiang;
Chi, Xiaoyi;
Leu, Ming C.;
Ochoa, Jorge;
|
| Investigation of a two-stage aqueous reactor design for carbon dioxide sequestration using steelmaking slag | Lekakh, Simon;
Robertson, D. G. C.;
Rawlins, C. H.;
Richards, Von;
Peaslee, Kent D.;
|
| Kinetics of aqueous leaching and carbonization of steelmaking slag | Lekakh, Simon;
Rawlins, C. H.;
Robertson, D. G. C.;
Richards, Von;
Peaslee, Kent D.;
|
| Mechanical and thermal properties of AlN–BN–SiC ceramics | Buchheit, Andrew A.;
Hilmas, Greg;
Fahrenholtz, William G.;
Deason, Douglas M.;
Wang, Hsin;
|
| Microstructure and mechanical characterization of ZrC–Mo cermets produced by hot isostatic pressing | Landwehr, Sean E.;
Hilmas, Greg;
Fahrenholtz, William G.;
Talmy, Inna G.;
DiPietro, Stephen G.;
|
| Microwave sintering of a ZrB2–B4C particulate ceramic composite | Zhu, Sumin;
Fahrenholtz, William G.;
Hilmas, Greg;
Zhang, Shi C.;
Yadlowsky, Edward J.;
Keitz, Michael D.;
|
| Modeling and rendering for development of a virtual bone surgery system | Niu, Qiang, 1971-;
|
| Modeling of the hand–arm system for impact loading in shear fastener installation | Joshi, Akul;
Guttenberg, Robert;
Leu, Ming C.;
Murray, Susan L.;
|
| Nanoparticulate composites of melt textured YBa2Cu3O7-x superconductors | Oratai, Jongprateep;
Dogan, Fatih;
|
| Nonlinear feed effect in machining chatter analysis | Landers, Robert G.;
Ulsoy, A. Galip;
|
| Parallel turning process parameter optimization based on a novel heuristic approach | Tang, Lie;
Landers, Robert G.;
Balakrishnan, S. N.;
|
| Pressure-less sintering of ZrB2-SiC ceramics | Zhang, Shi C.;
Hilmas, Greg;
Fahrenholtz, William G.;
|
| Processing of ZrC–Mo cermets for high temperature applications, Part II: Pressureless sintering and mechanical properties | Landwehr, Sean E.;
Hilmas, Greg;
Fahrenholtz, William G.;
Talmy, Inna G.;
|
| Synthesis, densification, and mechanical properties of TaB₂ | Zhang, Xiaohong;
Hilmas, Greg;
Fahrenholtz, William G.;
|
| Thermal properties of a reaction hot pressed Mo≤₅Si₃C≤₁ ceramic | Buchheit, Andrew A.;
Fahrenholtz, William G.;
Hilmas, Greg;
Deason, Doug M.;
Wang, H.;
|
| Thermal shock resistance of ZrB₂ and ZrB₂–30% SiC | Zimmermann, James W.;
Hilmas, Greg;
Fahrenholtz, William G.;
|
| Thermophysical properties of ZrB₂ and ZrB₂-SiC ceramics | Zimmermann, James W.;
Hilmas, Greg;
Fahrenholtz, William G.;
Dinwiddie, Ralph B.;
Porter, Wallace D.;
Wang, Hsin;
|
| Virtual bone surgery | Leu, Ming C.;
Niu, Q.;
Chi, X.;
|
| Virtual sculpting with surface smoothing based on level set method | Leu, Ming C.;
Zhang, W.;
|
