Missouri S&T Scholar's Mine Research RepositoryMissouri S&T Research
print 
Electromagnetic Compatibility Laboratory 

1975  1986  1987  1989  1990  1991  1992  1993  1994  1995  1996  1997  1998  1999  2000 
2001  2002  2003  2004  2005  2006  2007  2008 


2008  TOP

Title Author(s)
Estimating maximum radiated emissions from printed circuit boards with an attached cableDeng, Shaowei; Hubing, Todd H.; Beetner, Daryl G.;
An experimental investigation of higher order mode suppression in TEM cellsDeng, Shaowei; Pommerenke, David; Hubing, Todd H.; Shin, Dongshik;
Method of edge currents for calculating mutual external inductance in a microstrip structureKoledintseva, Marina; Drewniak, James L.; Van Doren, Thomas; Pommerenke, David; Cocchini, Matteo; Hockanson, D.M.;
Mutual external inductance in stripline structuresKoledintseva, Marina; Drewniak, James L.; Van Doren, Thomas; Pommerenke, David; Cocchini, Matteo; Hockanson, D.M.;
A novel 24 GHz one-shot, rapid and portable microwave imaging systemGhasr, M. T.; Abou-Khousa, M. A.; Kharkivskiy, Sergiy; Zoughi, Reza; Pommerenke, David;
Reconstruction of dispersive dielectric properties for PCB substrates using a genetic algorithmZhang, Jianmin; Koledintseva, Marina; Drewniak, James L.; Pommerenke, David; DuBroff, Richard E.; Yang, Zhiping; Cheng, Wheling; Rozanov, Konstantin N.; Antonini, Giulio; Orlandi, Antonio;
Susceptibility scanning as failure analysis tool for system-level electrostatic discharge (ESD) problemsGiorgi, Muchaidze; Koo, Jayong; Cai, Qing; Li, Tun; Han, Lijun; Martwick, Andrew; Wang, Kai; Min, Jin; Drewniak, James L.; Pommerenke, David;
System and IC level analysis of electrostatic discharge (ESD) and electrical fast transient (EFT) immunity and associated coupling mechanismsKoo, Ja Yong, 1970-;
Universal electric and magnetic field analyzer systemHo, Yong Cheh; Pommerenke, David; Li, Tun;
Using TEM cell measurements to estimate the maximum radiation from PCBs with cables due to magnetic field couplingDeng, Shaowei; Hubing, Todd H.; Beetner, Daryl G.;

2007  TOP

Title Author(s)
35-45 giga hertz transceiver system for phase and magnitude detectionAflaki Beni, Aman, 1981-;
Adaptive power control protocol with hardware implementation for wireless sensor and RFID reader networksCha, Kainan; Sarangapani, Jagannathan; Pommerenke, David;
Application and limits of IC and PCB scanning methods for immunity analysisCai, Qing; Koo, Ja Yong; Min, Jin; Muchaidze, Giorgi; Pommerenke, David;
Characterizing the electric field coupling from IC heatsink structures to external cables using TEM cell measurementsDeng, Shaowei; Hubing, Todd H.; Beetner, Daryl G.;
Development and application of a high-resolution thin-film probeLi, Shaohua; Hu, Kuifeng; Beetner, Daryl G.; Drewniak, James L.; Reck, James; OKeefe, Matt; Wang, Kai; Dong, Xiaopeng; Slattery, Kevin;
Double staticistal distribution of conductivity and aspect ratio of inclusions in dielectric mixtures at microwave frequenciesKoledintseva, Marina; DuBroff, Richard E.; Schwartz, Robert W.; Drewniak, James L.;
Estimation of high-frequency currents from near-field scan measurementsWeng, Haixiao; Beetner, Daryl G.; DuBroff, Richard E.; Shi, Jin;
Experimental investigation of the ESD sensitivity of an 8-bit microcontrollerBeetner, Daryl G.; Carlton, Ross; Han, Lijun; Koo, Ja Yong; Pommerenke, David;
BGA footprints modeling and physics based via models validation for power and signal integrity applicationsSelli, Giuseppe, 1975-;
Frequency-domain measurement method for the analysis of ESD generators and couplingKoo, Jayong; Cai, Qing; Muchaidze, Giorgi; Martwick, Andy; Wang, Kai; Pommerenke, David;
Hand-assembled cable bundle modeling for crosstalk and common-mode radiation predictionSun, Shishuang; Liu, Geping; Drewniak, James L.; Pommerenke, David;
The influence of printed circuit board design on TEM cell measurementsKasturi, Vijay, 1984-;
Mobile array designs with ANSERLIN antennas and efficient, wide-band PEEC models for interconnect and power distribution network analysisCracraft, Michael Andrew, 1978-;
Modeling noise coupling between package and PCB power/ground planes with an efficient 2-D FDTD/lumped element methodWang, Ting-Kuang; Chen, Sin-Ting; Tsai, Chi-Wei; Wu, Sung-Mao; Drewniak, James L.; Wu, Tzong-Lin;
Mode suppressed TEM cell design for high frequency IC measurementsBeetner, Daryl G.; Deng, Shaowei; Drewniak, James L.; Hubing, Todd H.; Kim, Sungnam; Kwak, Hocheol; Pommerenke, David; Shin, Dongshik;
Printed circuit board (PCB) loss characterization up-to 20 GHz and modeling, analysis and validationRajagopal, Abhilash, 1981-;
Shielding characteristics of a commercial 19-inch rack-based cabinetChen, Jue, 1970-;
A three-dimensional FDTD subgridding algorithm with separated temporal and spatial interfaces and related stability analysisXiao, Kai; Pommerenke, David; Drewniak, James L.;
Validation of worst-case and statistical models for an automotive EMC expert systemBeetner, Daryl G.; Weng, Haixiao; Wu, Meilin; Hubing, Todd H.;
Wave propagation on power cables with special regard to metallic screen designPapazyan, K. Ruslan; Pettersson, Per; Pommerenke, David;

2006  TOP

Title Author(s)
Analysis of radiated emissions from a printed circuit board using expert system algorithmsFu, Yan; Hubing, Todd H.;
Application of chip-level EMC in automotive product designHu. K.; Weng H.; Beetner, Daryl G.; Pommerenke, David; Drewniak, James L.; Lavery, K.; Whiles, J.;
Basic concepts in EMC for ICsHubing, Todd H.; Sicard, E.;
Calculating static field and charge distributions using full-wave boundary element methodsHaixin Ke; Hubing, Todd H.;
Characterizing package/PCB PDN interactions from a full-wave finite-difference formulationSun, Shishuang; Pommerenke, David; Drewniak, James L.; Xiao, Kai; Chen, Sin-Ting; Wu, Tzong-Lin;
Circuit models for power bus structures on printed circuit boards using a hybrid FEM-SPICE methodChunlei Guo; Hubing, Todd H.;
A closed-form expression for estimating radiated emissions from the power planes in a populated printed circuit boardHwan-Woo Shim; Hubing, Todd H.;
Common-mode radiation resulting from hand-assembled cable bundles on automotive platformsSun, Shishuang; Drewniak, James L.; Pommerenke, David;
Decentralized power control with implementation for RFID networksCha, Kainan; Ramachandran, Anil; Sarangapani, Jagannathan; Pommerenke, David;
Distributed cable sensors for structural damage detection: implementation issuesBrower, Michael; Royer, Zachary; Chen, Genda; Van Aken, David C.; Pommerenke, David;
An efficient approach for power delivery network design with closed-form expressions for parasitic interconnect inductancesChen Wang; Jingkun Mao; Selli, G.; Shaofeng Luan; Lin Zhang; Jun Fan; Pommerenke, David; DuBroff, Richard E.; Drewniak, James L.;
Extraction of dispersive material parameters using vector network analyzers and genetic algorithmsZhang, Jianmin; Koledintseva, Marina; Pommerenke, David; Drewniak, James L.; Rozanov, Konstantin N.; Antonini, Giulio; Orlandi, Antonio;
Finding the root cause of an ESD upset eventPommerenke, David; Koo, Jayong; Muchaidze, Giorgi;
Historical review and state of the artHubing, Todd H.; Sicard, E.;
Influence of an extended stub at connector ports on signal launches and TRL de-embeddingJianmin Zhang; Drewniak, James L.; Pommerenke, David; Zhiping Yang;
Laser optical in-circuit measurement system for immunity applicationsDing, Chong; Pommerenke, David;
Matched filter detection and identification of electronic circuits based on their unintentional radiated emissionsShaik, Ahmed; Weng, Haixiao; Dong, Xiaopeng; Hubing, Todd H.; Beetner, Daryl G.;
A Maxwell Garnett model for dielectric mixtures containing conducting particles at optical frequenciesKoledintseva, Marina; DuBroff, Richard E.; Schwartz, Robert W.;
A method for charactering EMI coupling paths and source properties in complex systemsShishuang Sun; Gang Feng; Chong Ding; Pommerenke, David; Drewniak, James L.;
Microwave reflectometry as a novel diagnostic tool for detection of skin cancersMehta, P.; Chand, K.; Narayanswamy, D.; Beetner, Daryl G.; Zoughi, Reza; Stoecker, W.V.;
Modeling of dielectric mixtures containing conducting inclusions with statistically distributed aspect ratioKoledintseva, Marina; Chandra, S.K.R.; DuBroff, Richard E.; Schwartz, Robert W.;
Modeling of field distribution and energy storage in diphasic dielectricsPatil, Sandeep; Koledintseva, Marina; Schwartz, Robert W.;
Modulation of mm-waves by an acoustically controlled monocrystalline hexagonal ferrite resonatorKoledintseva, Marina;
Neural network based stock market return forecasting using data mining for variable reductionEnke, David L.;
Novel distributed cable sensors for detection of cracks in RC structuresChen, Genda; Pommerenke, David;
Predicting TEM cell measurements from near field scan dataWeng, Haixiao; Beetner, Daryl G.; DuBroff, Richard E.;
Quantifying electric and magnetic field coupling from integrated circuits with TEM cell measurementsKasturi, V.; Deng, S.; Hubing, Todd H.; Beetner, Daryl G.;
Signal link-path characterization up to 20 GHz based on a stripline structureJianmin Zhang; Drewniak, James L.; Pommerenke, David; DuBroff, Richard E.; Zhiping Yang; Wheling Cheng; Camerlo, S.; Fisher, J.;
Unified spectral technique application for study of radiator behavior near planar layered compositesKoledintseva, Marina; Bodrov, V.V.; Sourkova, I.V.; Sabirov, M.M.; Sourkov, V.I.;

2005  TOP

Title Author(s)
Analysis of a low-pass filter employing a 4-pin capacitorZeeff, T.M.; Ritter, A.; Hubing, Todd H.; Van Doren, T.;
Analytical model for the rectangular power-ground structure including radiation lossChen, R.L.; Chen, Ji; Hubing, Todd H.; Shi, Weimin;
Application of transmission line models to backpanel plated through-hole via designShaowei Deng; Hubing, Todd H.; Drewniak, James L.; Jun Fan; Knighten, J.L.; Smith, N.W.;
Calibration and compensation of near-field scan measurementsJin Shi; Cracraft, M.A.; Slattery, K.P.; Yamaguchi, M.; DuBroff, Richard E.;
Complex power distribution network investigation using SPICE based extraction from first principle formulationsSelli, G.; Drewniak, James L.; DuBroff, Richard E.; Fan, J.; Knighten, J.L.; Smith, N.W.; Archambeault, B.; Grivet-Talocia, S.; Canavero, F.;
Coupling between differential signals and the DC power-bus in multilayer PCBsWang, Chen; Leone, Marco; Drewniak, James L.; Orlandi, Antonio;
Crack detection of a full-scale reinforced concrete girder with a distributed cable sensorChen, Genda; Sun, S.; Pommerenke, David; Drewniak, James L.; Green, Gary Gordon; McDaniel, R.D.; Belarbi, Abdeldjelil (DJ); Mu, H.;
Derivation of a closed-form approximate expression for the self-capacitance of a printed circuit board traceShim, H.W.; Hubing, Todd H.;
Determination of high frequency package currents from near-field scan dataXiaopeng Dong; Shaowei Deng; Beetner, Daryl G.; Hubing, Todd H.; Van Doren, T.P.;
Distributed crack sensors featuring unique memory capability for post-earthquake condition assessment of RC structuresChen, Genda; McDaniel, Ryan; Sun, Shishuang; Pommerenke, David; Drewniak, James L.;
Distributed strain measurement of a large-scale reinforced concrete beam-column assembly under cyclic loadingChen, Genda; Xu, Bin; McDaniel, Ryan D.; Ying, Xiaofei; Pommerenke, David; Wu, Zhishen;
Effective strategies for choosing and locating printed circuit board decoupling capacitorsHubing, Todd H.;
An efficient approach for power delivery network design with closed-form expressions for parasitic interconnect inductancesWang, Chen; Mao, Jingkun; Selli, Giuseppe; Luan, Shaofeng; Zhang, Lin; Fan, Jun; Pommerenke, David; DuBroff, Richard E.; Drewniak, James L.;
An embedded real-time neuro-fuzzy controller for mobile robot navigationZhang, Nian; Beetner, Daryl G.; Wunsch, Donald C.; Hemmelman, B.; Hasan, A.;
EMI-debugging of complex systems using different time, modulation, STFFT and frequency domain signal analysis techniquesLi, Zhe; Pommerenke, David;
EMI specifics of synchronous DC-DC buck convertersLi, Zhe; Pommerenke, David;
Engineering of composite media for shields at microwave frequenciesKoledintseva, Marina; Ravva, P.C.; DuBroff, Richard E.; Drewniak, James L.; Rozanov, K.; Archambeault, B.;
ESD susceptibility characterization of an EUT by using 3D ESD scanning systemKai Wang; Jayong Koo; Muchaidze, G.; Pommerenke, David;
Estimation of current from near-field measurementHaixiao Weng; Beetner, Daryl G.; DuBroff, Richard E.; Jin Shi;
Hands-on projects and exercises to strengthen understanding of basic computer engineering conceptsDua, Rohit; Seiffertt, John E.; Blaha, Brian; Gupta, Kapil; Satagopan, Venkat; Stanley, R. Joe; Beetner, Daryl G.; Wunsch, Donald C.;
A hybrid approach to decrease port influence in transmission line characterizationJianmin Zhang; Pommerenke, David; Drewniak, James L.; DuBroff, Richard E.; Zhiping Yang; Wheling Cheng; Fisher, J.; Camerlo, S.;
The method of auxiliary sources as an efficient numerical technique for large 3D semi open structuresZaridze, R.; Kakulia, D.; Tavzarashvili, K.; Ghvedashvili, G.; Pommerenke, David; Kai Xiao;
Microwave permeability of Co2Z compositesRozanov, K.N.; Li, Z.W.; Chen, L.F.; Koledintseva, Marina;
Microwave reflectometry as a novel diagnostic method for detection of skin cancersChand, K.; Mehta, P.; Beetner, Daryl G.; Zoughi, Reza; Stoecker, W.V.;
Model for estimating radiated emissions from a printed circuit board with attached cables due to Voltage-driven sourcesHwan-Woo Shim; Hubing, Todd H.;
Modulation of millimeter waves by acoustically controlled hexagonal ferrite resonatorKoledintseva, Marina; Kitaitsev, A.A.;
Neural network detection and identification of electronic devices based on their unintended emissionsHaixiao Weng; Xiaopeng Dong; Xiao Hu; Beetner, Daryl G.; Hubing, Todd H.; Wunsch, Donald C.;
A new test setup and method for the calibration of current clampsPommerenke, David; Chundru, Ramachandran; Chandra, Sunitha;
Power integrity investigation of BGA footprints by means of the segmentation methodSelli, G.; Drewniak, James L.; DuBroff, Richard E.; Jun Fan; Knighten, J.L.; Smith, N.W.; McCoy, D.; Archambeault, B.;
A three-dimensional FDTD subgridding method with separate spatial and temporal subgridding interfacesKai Xiao; Pommerenke, David; Drewniak, James L.;
Traces in proximity to gaps in return planesZeeff, T.M.; Hubing, Todd H.; Van Doren, T.P.;
Using an LU recombination method to improve the performance of the boundary element method at very low frequenciesKe, Haixin; Hubing, Todd H.;
Validation of circuit extraction procedure by means of frequency and time domain measurementAntonini, G.; Scogna, A.C.; Orlandi, A.; Ricchiuti, V.; Selli, G.; Luan, S.; Drewniak, James L.;
Voltage regulator module noise analysis for high-volume server applicationsMatoglu, E.; Pham, N.; Selli, G.; Lai, M.; Connor, S.; Drewniak, James L.; Archambeault, B.; Wang, D.; Kuhn, D.; Hashemi, R.; de Araujo, D.N.; Cases, M.; Wilkie, B.; Herrman, B.; Patel, P.;
Wideband Lorentzian media in the FDTD algorithmKoledintseva, Marina; Drewniak, James L.; Pommerenke, David; Antonini, Giulio; Orlandi, Antonio; Rozanov, Konstantin N.;

2004  TOP

Title Author(s)
Analysis of chip-level EMI using near-field magnetic scanningDong, X.; Deng, S.; Hubing, Todd H.; Beetner, Daryl G.;
Anticipating EMI and on-board interference in automotive platformsSun, S.; Liu, G.; Pommerenke, David; Drewniak, James L.; Kautz, R.W.; Chen, C.;
Characterization of human metal ESD reference discharge event and correlation of generator parameters to failure levels-part I: reference eventChundru, Ramachandran; Pommerenke, David; Wang, Kai; Van Doren, Thomas; Centola, Federico Pio; Huang, Jiu Sheng;
Characterization of human metal ESD reference discharge event and correlation of generator parameters to failure levels-part II: correlation of generator parameters to failure levelsWang, Kai; Pommerenke, David; Chundru, Ramachandran; Van Doren, Thomas; Centola, Federico Pio; Huang, Jiu Sheng;
A circuit approach to model narrow slot structures in a power busZhang, L.; Archambeault, B.; Conner, S.; Knighten, J.L.; Fan, J.; Smith, N.W.; Alexander, R.; DuBroff, Richard E.; Drewniak, James L.;
A CN-FDTD scheme and its application to VLSI interconnects/substrate modelingRui Qiang; Dagang Wu; Ji Chen; Chen Wang; Drewniak, James L.;
Common-mode current due to a trace near a PCB edge and its suppression by a guard bandKayano, Yoshiki; Tanaka, Motoshi; Drewniak, James L.; Inoue, Hiroshi;
Comparison of via equivalent circuit model accuracy using quasi-static and full-wave approachesArchambeault, B.; Connor, S.; Jianmin Zhang; Drewniak, James L.; Lai, M.; Orlandi, A.; Antonini, G.; Ruehli, A.;
Damage detection of reinforced concrete beams with novel distributed crack/strain sensorsChen, Genda; Mu, H.; Pommerenke, David; Drewniak, James L.;
Detection of basal cell carcinoma using electrical impedance and neural networksDua, R.; Beetner, Daryl G.; Stoecker, W.V.; Wunsch, Donald C.;
Effects of open stubs associated with plated through-hole vias in backpanel designsShaowei Deng; Jingkun Mao; Hubing, Todd H.; Drewniak, James L.; Jun Fan; Knighten, J.L.; Smith, N.W.; Alexander, R.;
Electrical material property measurements using a free-field, ultra-wideband system [dielectric measurements]Grosvenor, C.A.; Johnk, R.; Novotny, D.; Canales, S.; Baker-Jarvis, J.; Janezic, M.; Drewniak, James L.; Koledintseva, Marina; Zhang, J.; Rawa, P.;
Electromagnetic analysis for vehicle antenna development using method of auxiliary sourcesZaridze, R.S.; Kakulia, D.G.; Tavzarashvili, K.N.; Ghvedashvili, G.N.; Pommerenke, David; Xiao, Kai;
Electromagnetic interference (EMI) of system-on-package (SOP)Sudo, T.; Sasaki, H.; Masuda, N.; Drewniak, James L.;
Electromagnetic interference of system on packageSudo, Toshio; Sasaki, Hideki; Masuda, Norio; Drewniak, James L.;
Estimation of heart-surface potentials using regularized multipole sourcesBeetner, Daryl G.; Arthur, R.M.;
Expert system algorithms for identifying radiated emission problems in printed circuit boardsShim, H.; Hubing, Todd H.; Van Doren, T.; DuBroff, Richard E.; Drewniak, James L.; Pommerenke, David; Kaires, R.;
Extracting R, L, G, C parameters of dispersive planar transmission lines from measured S-parameters using a genetic algorithmZhang, Jianmin; Koledintseva, Marina; Drewniak, James L.; Antonini, G.; Orlandi, A.;
Extraction of a SPICE via model from full-wave modeling for differential signalingShaofeng Luan; Selli, G.; Drewniak, James L.; De Luca, A.; Antonini, G.; Scogna, A.C.; Orlandi, A.;
Extraction of SPICE-type equivalent circuits of signal via transitions using the PEEC methodJingkun Mao; Drewniak, James L.; Antonini, G.; Orlandi, A.;
An extrapolation procedure to shorten time domain simulationsSelli, G.; Drewniak, James L.; Pommerenke, David;
Investigation of cavity resonances in an automobileHaixiao Weng; Beetmer, D.G.; Hubing, Todd H.; Xiaopeng Dong; Wiese, R.; McCallum, J.;
Landmine detection and discrimination using high-pressure waterjetsBeetner, Daryl G.; Stanley, R. Joe; Agarwal, Sanjeev; Somasundaram, Deepak R.; Nema, Kopal; Mantha, Bhargav;
MAS-MoM hybrid method with wire's image using in excitation problemsKakulia, D.G.; Karkashadze, D.D.; Tavzarashvili, K.N.; Ghvedashvili, G.N.; Zaridze, R.S.; Pommerenke, David; Kai Xiao;
Modeling FPGA current waveform and spectrum and PDN noise estimationZamek, Iliya; Boyle, Peter; Li, Zhe; Sun, Shishuang; Chen, Xiaohe; Chandra, Sandeep; Li, Tun; Beetner, Daryl G.; Drewniak, James L.;
Modeling the wave propagation properties of power cables using numerical simulationsPapazyan, R.; Pommerenke, David; Eriksson, R.;
Partial discharge on-line monitoring for HV cable systems using electrooptic modulatorsLewin, Paul L.; Pommerenke, David; Sutton, Simon J.; Tian, Yuan; Wilkinson, James S.;
The PCB level ESD immunity study by using 3 dimension ESD scan systemWang, Kai; Pommerenke, David; Zhang, Jian Min; Chundru, Ramachandran;
A preliminary study of maximum system-level crosstalk at high frequencies for coupled transmission linesDong, X.; Weng, H.; Beetner, Daryl G.; Hubing, Todd H.; Wiese, R.; McCallum, J.;
Radiated emissions from populated printed circuit boards due to power bus noiseShim, H.; Fu, Y.; Hubing, Todd H.;
Representation of permittivity for multiphase dielectric mixtures in FDTD modelingKoledintseva, Marina; Wu, J.; Zhang, H.; Drewniak, James L.; Rozanov, K.N.;
Signal loss, spatial resolution, and sensitivity of long coaxial crack sensorsChen, Genda; Drewniak, James L.; Pommerenke, David; Sun, Shishuang;
Spectrum visualization and measurement of power parameters of microwave wide-band noiseKoledintseva, Marina; Kitaitsev, A.; Konkin, V.; Radchenko, V.;
Static and quasi-dynamic load balancing in parallel FDTD codes for signal integrity, power integrity, and packaging applicationsSeguin, S.A.; Cracraft, M.A.; Drewniak, James L.;
A study on the correspondence of common-mode current in electromagnetic radiation from a PCB with a guard-bandKayano, Y.; Tanaka, M.; Inoue, H.; Drewniak, James L.;
Susceptibility characterization of a cavity with an aperture by using slowly rotating EM fields: FDTD analysis and measurementsMurano, Kimitoshi; Sanpei, Ttakeshi; Xiao, Fengchao; Wang, Chen; Kami, Yoshio; Drewniak, James L.;
A three-dimensional FDTD subgridding algorithm based on interpolation of current densityXiao, K.; Pommerenke, David; Drewniak, James L.;
A time domain approach to estimate current draw from SMT decoupling capacitorsZhang, Lin; Archambeault, B.; Conner, S.; Knighten, J.L.; Fan, J.; Smith, N.W.; Alexander, R.; DuBroff, Richard E.; Drewniak, James L.;
Using near-field scanning to predict radiated fieldsShi, Jin; Cracraft, Michael A.; Zhang, Jianmin; DuBroff, Richard E.; Slattery, Kevin; Yamaguchi, Masahiro;
Validation of equivalent circuits extracted from S-parameter data for eye-pattern evaluationSelli, G.; Lai, M.; Shaofeng Luan; Drewniak, James L.; DuBroff, Richard E.; Jun Fan; Knighten, J.L.; Smith, N.W.; Antonini, G.; Orlandi, A.; Archambeault, B.; Connor, S.;
Via coupling within power-return plane structures considering the radiation lossChen, R.L.; Chen, J.; Hubing, Todd H.; Shi, W.;

2003  TOP

Title Author(s)
Analysis of simple two-capacitor low-pass filtersZeeff, T.M.; Hubing, Todd H.; Van Doren, T.P.; Pommerenke, David;
Anticipating EMI using transfer functions and signal integrity informationWang, Chen; Drewniak, James L.; Nadolny, J.;
Anticipating vehicle-level EMI using a multi-step approachLiu, Geping; Pommerenke, David; Drewniak, James L.; Kautz, R.W.; Chen, Chingchi;
Application of the cavity model to lossy power-return plane structures in printed circuit boardsMinjia Xu; Hao Wang; Hubing, Todd H.;
DC power-bus noise isolation with power-plane segmentationWei Cui; Jun Fan; Yong Ren; Hao Shi; Drewniak, James L.; DuBroff, Richard E.;
The development of a closed-form expression for the input impedance of power-return plane structuresXu, Minjia; Hubing, Todd H.;
Differentiation among basal cell carcinoma, benign lesions, and normal skin using electric impedanceBeetner, Daryl G.; Kapoor, S.; Manjunath, S.; Xiangyang Zhou; Stoecker, W.V.;
A dual-current method for characterizing common-mode loop impedanceLiu, Geping; Ding, Yimin; Chen, Chingchi; Kautz, R.; Drewniak, James L.; Pommerenke, David; Koledintseva, Marina;
Electromagnetic compatibility issues in mobile computingOrlandi, A.; Drewniak, James L.;
FDTD data extrapolation using multilayer perceptron (MLP)Goksu, H.; Pommerenke, David; Wunsch, Donald C.;
FDTD method capable of attaching rectangular domainsXiao, Kai; Pommerenke, David; Drewniak, James L.;
FDTD modeling of isotropic dispersive magnetic materialsJing Wu; Drewniak, James L.; Koledintseva, Marina; Pommerenke, David;
Foreword advanced emc numerical modelingChristopoulos, C.; Drewniak, James L.;
Impedance boundary conditions in a hybrid FEM/MOM formulationHao Wang; Minjia Xu; Chen Wang; Hubing, Todd H.;
Lumped-circuit model extraction for vias in multilayer substratesJun Fan; Drewniak, James L.; Knighten, J.L.;
Memory DIMM DC power distribution analysis and designMao, Jingkun; Wang, Chen; Selli, G.; Archambeault, B.; Drewniak, James L.;
Modeling issues for full-wave numerical EMI simulationCracraft, M.A.; Ye, Xiaoning; Wang, Chen; Chandra, S.; Drewniak, James L.;
Numerical modeling of electrostatic discharge generatorsKai Wang; Pommerenke, David; Chundru, R.; Van Doren, T.; Drewniak, James L.; Shashindranath, A.;
A numerical investigation of interior resonances in the hybrid FEM/MoM methodJi, Yun; Wang, Hao; Hubing, Todd H.;
PCB EMC design guidelines: a brief annotated listHubing, Todd H.;
Power-bus decoupling with embedded capacitance in printed circuit board designXu, Minjia; Hubing, Todd H.; Chen, J.; Van Doren, T.P.; Drewniak, James L.; DuBroff, Richard E.;
Printed circuit board EMI source mechanismsHubing, Todd H.;
Quantifying the effects on EMI and SI of source imbalances in differential signalingWang, Chen; Drewniak, James L.;
A RAM-based neural network for collision avoidance in a mobile robotYao, Q.; Beetner, Daryl G.; Wunsch, Donald C.; Osterloh, B.;
Reconstruction of the parameters of Debye and Lorentzian dispersive media using a genetic algorithmJianmin Zhang; Koledintseva, Marina; Antonini, G.; Drewniak, James L.; Rozanov, K.; Orlandi, A.;
A software debugger interface for an 8051 hardware modelVerma, L.; Pottinger, H.J.; Beetner, Daryl G.;
Spectrum visualization and measurement of power parameters of microwave wideband noiseKoledintseva, Marina; Kitaitsev, A.; Konkin, V.; Radchenko, V.;
SPICE model libraries for via transitionsLuan, Shaofeng; Selli, G.; Fan, J.; Lai, M.; Knighten, J.L.; Smith, N.W.; Alexander, R.; Antonini, G.; Ciccomancini, A.; Orlandi, A.; Drewniak, James L.;
Statistical approach to the EMI modeling of large ASICs by a single noise-current sourceAntonini, G.; Drewniak, James L.; Leone, M.; Orlandi, A.; Ricchiuti, V.;
A study of the probe induced disturbances on the near-field measurementShi, Jin; DuBroff, Richard E.; Slattery, K.; Yamaguchi, M.; Aral, K.-I.;
A study on influence of guard band on common-mode current related to a microstrip lineKayano, Y.; Tanaka, M.; Drewniak, James L.; Inoue, H.;

2002  TOP

Title Author(s)
Alternatives to gaskets in shielding an enclosureCentola, F.; Pommerenke, David; Kai, X.; Drewniak, James L.;
Anticipating full vehicle radiated EMI from module-level testing in automobilesLiu, Geping; Chen, Chingchi; Tu, Yuhua; Drewniak, James L.;
Application of higher-order FEM elements to the analysis of microstrip structuresWang, H.; Guo, C.L.; Hubing, Todd H.; Drewniak, James L.; Van Doren, T.P.; DuBroff, Richard E.;
Decoupling strategies for printed circuit boards without power planesShim, H.W.; Zeeff, T.M.; Hubing, Todd H.;
Efficient modeling of discontinuities and dispersive media in printed transmission linesAraneo, R.; Wang, C.; Gu, X.; Drewniak, James L.; Celozzi, S.;
ESD currents and fields on the VCP and the HCP modeled using quasi-static approximationsPommerenke, David; Van Doren, T.P.; Wang Kai;
Estimating DC power bus noiseMao, Jingkun; Archambeault, B.; Drewniak, James L.; Van Doren, T.P.;
Estimating the noise mitigation effect of local decoupling in printed circuit boardsJun Fan; Wei Cui; Drewniak, James L.; Van Doren, T.P.; Knighten, J.L.;
Estimating the power bus impedance of printed circuit boards with embedded capacitanceXu, Minjia; Hubing, Todd H.;
An expert system architecture to detect system-level automotive EMC problemsRanganathan, S.; Beetner, Daryl G.; Wiese, R.; Hubing, Todd H.;
External parasitic inductance in microstrip and stripline geometries of finite sizeKoledintseva, Marina; Drewniak, James L.; Van Doren, T.P.; Hockanson, D.M.;
Extracting CAD models for quantifying noise coupling between vias in PCB layoutsLuan, S.; Fan, J.; Liu, W.; Xiao, F.; Knighten, J.; Smith, N.; Alexander, R.; Nadolny, J.; Kami, Y.; Drewniak, James L.;
Eye pattern evaluation in high-speed digital systems analysis by using MTL modelingAntonini, G.; Drewniak, James L.; Orlandi, A.; Ricchiuti, V.;
FDTD analysis of printed circuit boards containing wideband Lorentzian dielectric dispersive mediaKoledintseva, Marina; Pommerenke, David; Drewniak, James L.;
FDTD modeling incorporating a two-port network for I/O line EMI filtering designYe, Xiaoning; Drewniak, James L.;
FDTD modeling of skin effectWang, Chen; Drewniak, James L.; Li, Min;
Field extraction from near field scanning for a microstrip structureZhang, Lin; Slattery, K.P.; Wang, Chen; Yamaguchi, M.; Arai, K.-I.; DuBroff, Richard E.; Drewnial, J.L.; Pommerenke, David; Hubing, Todd H.;
Finite-element modeling of coaxial cable feeds and vias in power-bus structuresWang, Hao; Ji, Yun; Hubing, Todd H.;
High-performance inter-PCB connectors: analysis of EMI characteristicsYe, Xiaoning; Drewniak, James L.; Nadolny, J.; Hockanson, D.M.;
Modeling noise coupling from non-parallel PCB trace routingLuan, S.; Xiao, F.; Liu, W.; Jun Fan; Kami, Y.; Drewniak, James L.; DuBroff, Richard E.;
On the interior resonance problem when applying a hybrid FEM/MoM approach to model printed circuit boardsYun Ji; Hubing, Todd H.;
On the modeling of a gapped power-bus structure using a hybrid FEM/MoM approachJi, Yun; Hubing, Todd H.;
Power bus isolation using power islands in printed circuit boardsChen, J.; Hubing, Todd H.; Van Doren, T.P.; DuBroff, Richard E.;
Reducing power bus impedance at resonance with lossy componentsZeeff, T.M.; Hubing, Todd H.;
Transmission line modeling of vias in differential signalsChen Wang; Jun Fan; Knighten, J.L.; Drewniak, James L.; Smith, N.W.; Alexander, R.;

2001  TOP

Title Author(s)
20-H rule modeling and measurementsShim, H.W.; Hubing, Todd H.;
Applying the method of moments and the partial element equivalent circuit modeling techniques to a special challenge problem of a PC board with long wires attachedYun Ji; Archambeault, B.; Hubing, Todd H.;
Challenge problem update: PEEC and MOM analysis of a PC board with long wires attachedWang, H.; Archambeault, B.; Hubing, Todd H.;
DC power-bus design using FDTD modeling with dispersive media and surface mount technology componentsYe, Xiaoning; Koledintseva, Marina; Li, Min; Drewniak, James L.;
DC power-bus modeling and design with a mixed-potential integral-equation formulation and circuit extractionFan, Jun; Drewniak, James L.; Shi, Hao; Knighten, J.L.;
DC power bus noise isolation with power islandsCui, W.; Fan, J.; Shi, H.; Drewniak, James L.;
EMI considerations in selecting heat-sink-thermal-gasket materialsHuang, Yu; Butler, J.E.; de Sorgo, M.; DuBroff, Richard E.; Hubing, Todd H.; Drewniak, James L.; van Doren, T.P.;
An EMI estimate for shielding-enclosure evaluationLi, Min; Drewniak, James L.; Radu, S.; Nuebel, J.; Hubing, Todd H.; DuBroff, Richard E.; van Doren, T.P.;
EMI mitigation with multilayer power-bus stacks and via stitching of reference planesYe, Xiaoning; Hockanson, D.A.; Li, Min; Ren, Yong; Cui, Wei; Drewniak, James L.; DuBroff, Richard E.;
Estimation of printed circuit board power bus noise at resonance using a simple transmission line modelHu, H.; Hubing, Todd H.; Van Doren, T.;
FDTD and experimental investigation of EMI from stacked-card PCB configurationsHockanson, D.M.; Xiaoning Ye; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.; DuBroff, Richard E.;
Grounding of heatpipe/heatspreader and heatsink structures for EMI mitigationWang, C.; Drewniak, James L.; Knighten, J.L.; Wang, D.; Alexander, R.; Hockanson, D.M.;
High-power microwave wideband random signal measurement and narrowband signal detection against the noise backgroundKoledintseva, Marina; Kitaytsev, A.A.; Konkin, V.A.;
Improving the high-frequency attenuation of shunt capacitor, low-pass filtersOlsen, C.N.; Van Doren, T.P.; Hubing, Todd H.; Drewniak, James L.; DuBroff, Richard E.;
Including SMT ferrite beads in DC power bus and high-speed I/O line modelingJun Fan; Shaofeng, L.; Drewniak, James L.;
Incorporating two-port networks with S-parameters into FDTDYe, X.; Drewniak, James L.;
Investigation of PCB layout parasitics in EMI filtering of I/O linesYe, Xiaoning; Liu, Geping; Drewniak, James L.;
Mitigating power bus noise with embedded capacitance in PCB designsMinjia Xu; Hubing, Todd H.; Juan Chen; Drewniak, James L.; Van Doren, T.P.; DuBroff, Richard E.;
Modeling DC power-bus structures with vertical discontinuities using a circuit extraction approach based on a mixed-potential integral equationFan, Jun; Shi, Hao; Orlandi, A.; Knighten, J.L.; Drewniak, James L.;
Quantifying SMT decoupling capacitor placement in dc power-bus design for multilayer PCBsFan, Jun; Drewniak, James L.; Knighten, J.L.; Smith, N.W.; Orlandi, A.; Hubing, Todd H.; Van Doren, T.P.; DuBroff, Richard E.;
Reducing power bus impedance at resonance with lossy componentsZeeff, T.M.; Hubing, Todd H.;
Representation of gyromagnetic composite media for FDTD modelingKoledintseva, Marina; Drewniak, James L.; Ye, Xiaoning;

2000  TOP

Title Author(s)
Advances of gyromagnetic electronics for EMC problemsKoledintseva, Marina; Mikhailovsky, L.K.; Kitaytsev, A.A.;
Behavioral IGBT modeling for predicting high frequency effects in motor drivesTichenor, J.L.; Sudhoff, S.D.; Drewniak, James L.;
A common-mode current measurement technique for EMI performance evaluation of PCB structuresYe, X.N.; Hochanson, D.M.; Drewniak, James L.;
DC power bus design with FDTD modeling including a dispersive mediaXiaoning Ye; Jun Fan; Koledintseva, Marina; Drewniak, James L.;
DC power bus modeling in high-speed digital designs including conductor and dielectric lossesJun Fan; Hao Shi; Knighten, J.L.; Drewniak, James L.;
Development of a closed-form expression for the input impedance of power-ground plane structuresXu, Minjia; Ji, Yun; Hubing, Todd H.; Van Doren, T.P.; Drewniak, James L.;
EMC analysis of an 18" LCD monitorZeeff, T.M.; Hubing, Todd H.; Drewniak, James L.; DuBroff, R.E.; Van Doren, T.P.;
The EMI benefits of ground plane stitching in multi-layer power bus stacksYe, Xiaoning; Hockanson, D.M.; Li, Min; Cui, Wei; Radu, S.; Drewniak, James L.; VanDoren, T.P.; Hubing, Todd H.; DuBroff, Richard E.;
EMI from airflow aperture arrays in shielding enclosures-experiments, FDTD, and MoM modelingMin Li; Nuebel, J.; Drewniak, James L.; DuBroff, Richard E.; Hubing, Todd H.; Van Doren, T.P.;
EMI from cavity modes of shielding enclosures-FDTD modeling and measurementsMin Li; Nuebel, J.; Drewniak, James L.; DuBroff, Richard E.; Hubing, Todd H.; van Doren, T.P.;
EMI reduction from airflow aperture arrays using dual-perforated screens and lossMin Li; Nuebel, J.; Drewniak, James L.; Hubing, Todd H.; DuBroff, Richard E.; Van Doren, T.P.;
EMI resulting from a signal via transition through DC power bus-effectiveness of focal SMT decouplingWei Cui; Xiaoning Ye; Archambeault, B.; White, D.; Min Li; Drewniak, James L.;
Experimental and FDTD study of the EMI performance of an open-pin-field connector for modules-on-backplanesXiaoning Ye; Nadolny, J.; Drewniak, James L.; DuBroff, Richard E.; VanDoren, T.P.; Hubing, Todd H.;
Experimental and numerical study of the radiation from microstrip bendsWang, H.; Ji, Y.; Hubing, Todd H.; Drewniak, James L.; van Doren, T.P.; DuBroff, Richard E.;
Experimental evaluation of power bus decoupling on a 4-layer printed circuit boardChen, Juan; Drewniak, James L.; DuBroff, Richard E.; Hubing, Todd H.; Van Doren, T.P.; Xu, Minjia;
FDTD and FEM/MOM modeling of EMI resulting from a trace near a PCB edgeBerg, D.; Tanaka, M.; Ji, Y.; Ye, X.; Drewniak, James L.; Hubing, Todd H.; DuBroff, R.E.; Van Doren, T.P.;
FDTD modeling of lumped ferritesMin Li; Xiao Luo; Drewniak, James L.;
Finite element modeling of patch antenna and cavity sourcesJi, Y.; Hubing, Todd H.; Drewniak, James L.;
Laboratories teaching concepts in microcontrollers and hardware-software co-designBeetner, Daryl G.; Pottinger, H.; Mitchell, K.;

1999  TOP

Title Author(s)
Anticipating EMI from coupling between high-speed digital and I/O linesCui, W.; Li, M.; Luo, X.; Drewniak, James L.; Hubing, Todd H.; VanDoren, T.P.; DuBroff, Richard E.;
Application of a hybrid FEM/MOM method to a canonical PCB problemJi, Y.; Chen, J.; Hubing, Todd H.; Drewniak, James L.;
Application of composite gyromagnetic materials for absorbing radiation produced by microwave ovenKitaytsev, A.A.; Koledintseva, Marina; Konkin, V.A.; Cheparin, V.P.; Shinkov, A.A.;
EMI associated with inter-board connection for module-on-backplane and stacked-card configurationsYe, X.; Nadolny, J.; Drewniak, James L.; Hubing, Todd H.; Vaudoren, T.P.; DuBroff, Richard E.;
FDTD modeling of EMI antennasTanaka, M.; Wei Cui; Xiao Luo; Drewniak, James L.; Hubing, Todd H.; van Doren, T.P.; DuBroff, Richard E.;
Hardware-software co-verification in an undergraduate laboratoryPottinger, H.J.; Beetner, Daryl G.;
Microstrip coupling algorithm validation and modification based on measurements and numerical modelingZeeff, T.; Olsen, C.E.; Hubing, Todd H.; Drewniak, James L.; DuBroff, Richard E.;
Physical and technical bases of using ferromagnetic resonance in hexagonal ferrites for electromagnetic compatibility problemsKitaytsev, A.A.; Koledintseva, Marina;
Power bus noise reduction using power islands in printed circuit board designsHubing, Todd H.; Chen, J.; Drewniak, James L.; Van Doren, T.; Ren, Y.; Fan, J.; DuBroff, Richard E.;
Reproduction of spectrum envelope of microwave wideband noise and detection a narrowband signal in itKitaytsev, A.A.; Koledintseva, Marina; Konkin, V.A.;
RF isolation using power islands in DC power bus designFan, Jun; Ren, Yong; Chen, Juan; Hockanson, D.M.; Shi, Hao; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.; DuBroff, Richard E.;
Signal induced EMI in fibre channel cable-connector assembliesXu, M.; Radu, S.; Knighten, J.L.; Drewniak, James L.; Hubing, Todd H.; Hoeft, L.O.; DiBene, J.T., II.;
Slot and aperture coupling for airflow aperture arrays in shielding enclosure designsLi, M.; Drewniak, James L.; Hubing, Todd H.; DuBroff, Richard E.; VanDoren, T.P.;
Wide-bandwidth multi-resolutional analysis of a surface-mounted PM synchronous machineSudhoff, S.D.; Tichenor, J.L.; Drewniak, James L.;

1998  TOP

Title Author(s)
Considerations for magnetic-field coupling resulting in radiated EMIHockanson, D.; Drewniak, James L.; DuBroff, Richard E.; Hubing, Todd H.; Van Doren, T.P.;
Designing power bus decoupling for CMOS devicesRadu, S.; DuBroff, Richard E.; Hubing, Todd H.; Van Doren, T.P.;
Design of airflow aperture arrays in shielding enclosuresLi, M.; Radu, S.; Neubel, J.; Drewniak, James L.; Hubing, Todd H.; VanDoren, T.P.;
EMC applications of the EMAP5 hybrid FEM/MOM codeYun Ji; Ali, M.W.; Hubing, Todd H.;
An impact of layer stack-up on EMIRadu, S.; Zeeff, T.; Nuebel, J.; Drewniak, James L.; Van Doren, T.P.; Hubing, Todd H.;
Incorporating vertical discontinuities in power-bus modeling using a mixed-potential integral equation and circuit extraction formulationFan, J.; Shi, H.; Drewniak, James L.; Hubing, Todd H.; DuBroff, Richard E.; Van Doren, T.P.;
Microwave filtering of unwanted oscillations on base of hexagonal ferrite composite thick filmsKoledintseva, Marina; Kitaytsev, A.A.; Shinkov, A.A.;
Millimeter wave signals detection by means of monocrystal hexagonal ferrite ellipsoidKoledintseva, Marina; Kitaytsev, A.A.;
Modeling multilayered PCB power-bus designs using an MPIE based circuit extraction techniqueHao Shi; Jun Fan; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Time history extrapolation for FDTD modeling of shielding enclosure designs and EMI antenna geometriesLuo, X.; Li, M.; Drewniak, James L.;

1997  TOP

Title Author(s)
Comparison of FDTD algorithms for subcellular modeling of slots in shielding enclosuresKuang-Pin Ma; Min Li; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Effects of gapped groundplanes and guard traces on radiated EMIBritt, D.S.; Hockanson, D.M.; Sha, F.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
EMI from apertures at enclosure cavity mode resonancesLi, M.; Ji, Y.; Radu, S.; Nuebel, J.; Cui, W.; Drewniak, James L.; Hubing, Todd H.; VanDoren, T.P.;
An experimental procedure for characterizing interconnects to the DC power bus on a multilayer printed circuit boardShi, H.; Fei Sha; Drewniak, James L.; Van Doren, T.P.; Hubing, Todd H.;
An expert system for predicting radiated EMI from PCB'sKashyap, N.; Hubing, Todd H.; Drewniak, James L.; Van Doren, T.;
A hybrid FEM/MOM technique for electromagnetic scattering and radiation from dielectric objects with attached wiresAli, M.W.; Hubing, Todd H.; Dreniak, J.L.;
Identifying an EMI source and coupling path in a computer system with sub-module testingRadu, S.; Ji, Y.; Nuebel, J.; Drewniak, James L.; Van Doren, T.P.; Hubing, Todd H.;
Investigation of internal partitioning in metallic enclosures for EMI controlRadu, S.; Li, M.; Nuebel, J.; Hockanson, D.M.; Ji, Y.; Drewniak, James L.; Hubing, Todd H.; VanDoren, T.P.;
Investigation of split groundplanes at the connector for EMI controlHockanson, D.; Drewniak, James L.; Nuebel, J.; Parker, J.C., Jr.;
Lumped-element sections for modeling coupling between high-speed digital and I/O linesCui, W.; Shi, H.; Luo, X.; Sha, F.; Drewniak, James L.; Van Doren, T.P.; Anderson, T.;
Numerical and experimental corroboration of an FDTD thin-slot model for slots near corners of shielding enclosuresMin Li; Kuang-Ping Ma; Hockanson, D.M.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Quantifying EMI resulting from finite-impedance reference planesHockanson, D.M.; Drewniak, J.L.; Hubing, Todd H.; van Doren, T.P.; Fei Sha; Cheung-Wei Lam;
Radiation imaging operators applied to the detection of velocity and density contrast boundariesRaza, M.I.; DuBroff, Richard E.; Drewniak, James L.;

1996  TOP

Title Author(s)
A comparison of an FDTD thin-slot algorithm and method of moments for modeling slots near cornersMa, K.-P.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Dispersion comparison for DSI- and tensor-based nonorthogonal FDTDHao Shi; Drewniak, James L.;
Experimental and numerical investigations of fundamental radiation mechanisms in PCB designs with attached cablesHockanson, D.M.; Lam, C.-W.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
An expert system approach to EMC modelingHubing, Todd H.; Drewniak, James L.; Van Doren, T.; Kashyap, N.;
FDTD modeling of common-mode radiation from cablesHockanson, D.M.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Generation of synthetic-focus images from pulse-echo ultrasound using difference equationsBeetner, Daryl G.; Arthur, R.M.;
Interaction between millimeter oscillations and monocrystal hexagonal ferrites with modulated resonance frequencyKitaytsev, A.; Koledintseva, Marina;
Investigation of fundamental EMI source mechanisms driving common-mode radiation from printed circuit boards with attached cablesHockanson, D.M.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.; Fei Sha; Wilhelm, M.J.;
Simulation and measurement for decoupling on multilayer PCB DC power busesShi, H.; Yuan, F.; Sha, F.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;

1995  TOP

Title Author(s)
A comparison of FDTD algorithms for subcellular modeling of slots in shielding enclosuresKuang-Ping Ma; Drewniak, James L.;
Diagnosing and modeling common-mode radiation from printed circuit boards with attached cablesDrewniak, James L.; Fei Sha; Van Doren, T.P.; Hubing, Todd H.; Shaw, J.;
An experimental investigation of 4-layer printed circuit board decouplingHubing, Todd H.; Van Doren, T.; Sha, F.; Drewniak, James L.; Wilhelm, M.;
FDTD modeling of thin wires for simulating common-mode radiation from structures with attached cablesHockanson, D.M.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Integrating electromagnetic compatibility laboratory exercises into undergraduate electromagneticsDrewniak, James L.; Hubing, Todd H.; Van Doren, T.P.; Fei Sha;
Power bus decoupling on multilayer printed circuit boardsHubing, Todd H.; Drewniak, James L.; Van Doren, T.P.; Hockanson, D.M.;
Remote detection of acoustic boundaries using radiation imaging operatorsDuBroff, Richard E.; Raza, M.I.; Herrick, T.J.;
Stop that noiseVan Doren, T.; Hubing, Todd H.; Drewniak, James L.; Fei Sha; Hockanson, D.;
Study of interconnect vias by the discrete surface integral methodHao Shi; Drewniak, James L.;

1994  TOP

Title Author(s)
Application of the finite-difference time-domain method to radiation from shielded enclosuresHockanson, D.M.; Drewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Common mode currents induced on wires attached to multilayer printed wire boards with segmented ground planesHill, R.L.; Van Doren, T.; Hubing, Todd H.; Drewniak, James L.; Gisn, F.;
Identifying and quantifying printed circuit board inductanceHubing, Todd H.; Van Doren, T.P.; Drewniak, James L.;
Investigation of fundamental mechanisms of common-mode radiation from printed circuit boards with attached cablesDrewniak, James L.; Hubing, Todd H.; Van Doren, T.P.;
Modeling power bus decoupling on multilayer printed circuit boardsDrewniak, James L.; Hubing, Todd H.; VanDoren, T.P.; Baudendistal, P.;
A modular approach to numerical EM modelingHubing, Todd H.;
The role of component packaging in system electromagnetic compatibilityHubing, Todd H.;

1993  TOP

Title Author(s)
An algorithm for automated printed circuit board layout and routing evaluationHubing, Todd H.; Grover, P.; Van Doren, T.; Drewniak, James L.; Hill, L.;
EMC applications of EMAP-2: a 3D finite element modeling codeHubing, Todd H.; Ali, M.;

1992  TOP

Title Author(s)
New EMC design guidelines for multilayer printed wiring boardsHubing, Todd H.; Van Doren, T.P.;

1991  TOP

Title Author(s)
The synthesis of patterns using a series-fed array of annular sector radiating line (ANSERLIN) elements: Low-profile, circularly polarized radiatorsDrewniak, James L.; Mayes, P.E.;

1990  TOP

Title Author(s)
Bundled cable parameters and their impact on EMI measurement repeatabilityHubing, Todd H.;

1989  TOP

Title Author(s)
ANSERLIN. a broad-band, low-profile, circularly polarized antennaDrewniak, James L.; Mayes, P.E.;
The effect of cable terminations on EMI measurementsHubing, Todd H.;
Modeling the electromagnetic radiation from electrically small table-top productsHubing, Todd H.; Kaufman, J.F.;

1987  TOP

Title Author(s)
A dual circular polarization radiating-line antennaDrewniak, James L.; Mayes, P.; Tanner, D.; Woodruff, J.;
Estimation approach to locating buried geological interfacesOmar, A.; Addeeb, A.; Slivinsky, C.; DuBroff, Richard E.;
Power division by element design in a circularly polarized, series-fed arrayDrewniak, James L.; Mayes, P.;

1986  TOP

Title Author(s)
A log-spiral, radiating-line antennaDrewniak, James L.; Mayes, P.; Tanner, D.; Waller, R.;

1975  TOP

Title Author(s)
The effective autocorrelation function of maximum entropy spectraDuBroff, Richard E.;