"The usual method of treatment has been to charge the "flue dust" into reverberatories and smelt it with the regular charge of calcined ore. There was a consequent cost of handling and a serious loss thru furnace draft and boiling, due to the fine state of division of the material and the presence of sulphates, acid, and moisture.
The object of the paper is to treat this material by some leaching process, which will eliminate the above enumerated losses, and at the same time present the finished product at a lower cost, and with a higher extraction per ton, than has previously been done by other processes "--Introduction, page 1.
Clayton, Charles Yancey, 1891-
B.S. in General Science
Missouri School of Mines and Metallurgy
ii, 12 pages
© 1916 Edwin Alexander Kayser, All rights reserved.
Thesis - Open Access
Library of Congress Subject Headings
Fly ash -- Testing
Leaching -- Experiments
Print OCLC #
Electronic OCLC #
Link to Catalog Record
Kayser, Edwin Alexander, "Leaching flue dust" (1916). Bachelors Theses. 401.